S
P
E
C
F
I
L
E
PT-
LB51
Micro-Portable Wireless LCD Projector
As of May 2007
< 9 >
Parameter format
Parameter format
Size (Byte)
Difinition
<pl>
<off on>
<input signal>
<installation>
<language>
<power condition>
<lamp condition>
<acctch>
<lamp power>
<color temp>
3 (1 or 2 bytes also
possible when
under control)
1
3
1
3
3
1
4
1
1
Dicimal without signs: 0-999 (000, 001, 002...999)
Dicimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99)
Callback from the projector is 3 Byte.
0 = off, 1 = on
RG1 = computer 1, RG2 = computer 2, VID = video, SVD = S-Video
0 = front, 1 = rear, 2 = ceiling and front, 3 = ceiling and rear
ENG = English, DEU = German, FRA = French, ESP = Spanish,
ITL = Italian, JPN = Japanese, CHI = Chinese, POR = Portuguese,
SVE = Swedish, NOR = Norwegian, DAN = Danish, POL = Polish,
CES = Czech, MAG = Hungarian, RUS = Russian, THA = Thai, KOR = Korean
000 = power on (standby mode on), 001 = power off (standby mode off)
0 = standby, 1 = lamp on under control, 2 = lamp off,
3 = lamp off under control
Dicimal without signs: 0000-9999 hours
0 = economy, 1 = normal
0 = low, 1 = standard, 2 = high
Command example
To set the volume to +30, send the command as shown below.
STX
AVL
:
30
ETX
Start
Command
Parameter
End
NOTE: If a wrong command is received, the projector will send an ER401 command to the computer.
NOTE: When sending commands without parameters, a colon (:) is not necessary.
