Settings
34
ENGLISH
Menu operation (continued)
Computer connection guide
You can switch the output signals from
COMPUTER1/
COMPUTER2
terminal by pressing the following
computer command keys.
Manufacturer
Image output
selection
command
Panasonic
NEC
+
SAMSUNG
HP
+
acer
SHARP
TOSHIBA
+
NOTE:
The command keys depend on the manufacturers.
•
For detailed information, please refer to the instructions
provided with the computers.
If you want to turn off the computer connection guide, select
•
SIMPLE
or
OFF
.
OSD DESIGN
You can change the background of the on-screen menu
(OSD).
TYPE1
Semi transparent black
TYPE2
Solid blue
TYPE3
Semi transparent dark blue
WARNING MESSAGE
You can choose to or not to display the warning
messages.
ON
Warning messages will be
displayed
OFF
No display
NOTE:
When the
•
WARNING MESSAGE
is set to
OFF
, use the
projector with utmost care as most of the warning messages
will not be displayed.
▌
CLOSED CAPTION SETTING
If the input signal contains closed captions, you can turn
on the feature and switch channels.
CLOSED CAPTION
OFF
Deactive
ON
Active
MODE
CC1 - 4
Change the channels CC1 - 4
NOTE:
VCR with TBC (Time Base Corrector) function is
•
recommended for video cassette tapes.
▌
STARTUP LOGO
You can set the Panasonic logo, your own image
or Pre-set letters to be displayed at the start of the
projection.
Change setting
Change
setting
Change
setting
Change setting
ON
Display “
Panasonic
” logo
TEXT
Display the original text
USER
Display the image registered by the
user
OFF
No display
NOTE:
If
•
TEXT
is selected, the input letters are displayed at the
start of the projection. You can display 2 lines of original text
which contains up to 40 characters each.
If
•
USER
is selected, the image transferred by the Logo
Transfer Software is displayed at the start of the projection.
(You can install the Logo Transfer Software from the
provided CD-ROM.)
STARTUP LOGO
•
will be displayed for 30 seconds.
Manufacturer
Image output
selection
command
lenovo
LG
SONY
+
DELL
EPSON
+
FUJITSU
+
Apple
