ENGLISH - 37
r
For PT-LB305
Audio equipment
Control computer
Computer
Computer
Control computer
Attention
f
When connecting the projector to a computer or an external device, use the power cord supplied with each device and
commercially available shielded cables.
Note
f
For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to
HDMI standards is used, images may be interrupted or may not be projected.
f
If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume
feature to operate the projector.
f
When the <VARIABLE AUDIO OUT> terminal is connected with cable, the sound will not be output from the built-in speaker.
f
Attach the optional wireless module (Model No.: ET-WML100) or USB memory directly to the <USB A (VIEWER/
WIRELESS)> terminal of this projector without using a USB extension cable or USB hub.
f
If the video signal from the DVI-D terminal of the external device (such as a computer) is connected to the <HDMI IN>
terminal by using a conversion cable, you need to set the [Setting] menu → [HDMI setup] → [Sound] to [Computer] (
x
page
64) and input the audio signal to the <AUDIO IN 1> terminal.
Chapter 2 Getting Started - Connecting
