19
Preparation
18
Wireless mouse
You can use the remote control as a personal computer mouse. Set the Mode
(Projector/Computer) switch on the remote control unit to “Computer” and
connect the projector’s USB port to a personal computer counterpart with the
accessory USB cable.
B
For Windows (Versions 98SE, Me, 2000 and XP), you can use the
standard mouse driver which comes bundled with the operating
system.
Using the remote control unit
PUSH
Laser beam pointer
The laser beam emitted from the remote control can be used as a pointer by
pointing forward to the screen.
While the LASER button is being pressed, the laser beam is being emitted
and the operating indicator illuminates.
Do not look into the laser emitter of the remote control unit or point the laser
beam towards other people, otherwise damage to eyes may occur.
Caution
B
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
B
This remote control unit cannot be repaired.
N2QAEA000011
USB
REMOTE
SERIAL
RGB1 IN
RGB2 IN/RGB
R/R-Y/P
R
SYN
B/B-Y/P
B
RGB3 IN
G/Y
POWER
RGB
VIDEO
R-CLICK
LASER
MENU
PAGE
ENTER
FREEZE SHUTTER
FUNC1
Computer
Pro jector
SETUP
AUTO
Page
buttons
FGIH
button
Click button
R-CLICK button
Mode switch
(Computer/Projector)
Mode switch (Computer/Projector)
Move the mode switch to the
“Computer” position.
B
Page buttons
^: Functions as the Page Up button
on a personal computer keyboard.
v: Functions as the Page Down
button on a personal computer
keyboard.
B
Arrow (
F
FG
GI
IH
H
) buttons
These buttons can move the cursor
on a personal computer’s screen as
the personal computer mouse.
B
R-CLICK button
This button functions as the right
button on a personal computer mouse.
B
Click button
This button functions as the left button
on a personal computer mouse.
NOTE:
B
The optional wireless receiver
(ET-RMRC1) is needed for a personal
computer not equipped with a USB
port.
Projector
Accessory USB cable
Computer equipped with a USB port
