14
When setting [OPEN] or [SHARED] as authentication and setting [WEP] as the
w
q
encryption method:
DEFAULT KEY
: Set 1 – 4 numerals for the default key.
KEY1 – 4
:
Set a WEP key to the key number selected with [DEFAULT KEY].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key,
input five alphanumerics (or a 10-digit string for the hexadecimal format)
for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the
hexadecimal format).
When using [WPA-PSK] or [WPA2-PSK] :
w
q
Set a key.
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal
format.
When the authentication method is [WPA-EAP/WPA2-EAP], [WPA-EAP], [WPA2-EAP]:
w
q
Set [EAP], [USER NAME], and [PASSWORD].
EAP
_
1
:
Select the EAP setup in the RADIUS server
_
1
. Types of
EAP that can be selected are as follows.
PEAP
_
1
(MS-CHAPv2
_
1
), PEAP
_
1
(GTC
_
1
),
EAP-TTLS
_
1
(MD5
_
1
), EAP-TTLS
_
1
(MS-CHAPv2
_
1
),
EAP-FAST
_
1
(MS-CHAPv2
_
1
), EAP-FAST
_
1
(GTC
_
1
),
EAP-TLS
_
1,2
USER NAME:
Input a user name used for authentication (excluding
spaces)(maximum 64 characters).
PASSWORD:
Input a password used for authentication (maximum 64
characters).
1: “Glossary” (
_
See page
44 – 45)
2: When [EAP-TLS] is selected as EAP, it is required to setup “USER NAME”, “PASSWORD”, “DIGITAL
_
CERTIFICATE”, and “CA CERTIFICATE” with the WEB browser. (
See page
30 – 31)
If you are unable to connect to the wireless LAN through the access point even after performing the steps
•
in “Projector settings (See page
22)”, contact the manufacturer of the access point.
When using EAP, the projector needs to be set according to the setting of the RADIUS server. Check with
•
the network administrator for the setting of the RADIUS server.
When using an EAP together with an access point with invalid SSID broadcast, select WAP-EAP or
•
WAP2-EAP for the authentication method even if the authentication method of the access point is WPA-
EAP/WPA2-EAP.
Default settings of [USER1] - [USER3]
w
w
The following settings as [USER1] - [USER3] in the wireless LAN are set before the projector leaves the
factory.
SSID
Panasonic Projector
DHCP
OFF
IP ADDRESS
192.168.11.100
SUBNET MASK
255.255.255.0
DEFAULT GATEWAY
192.168.11.1
MODE
AD HOC
AUTHENTICATION
OPEN
ENCRYPTION
NONE
CHANNEL
11
NETWORK menu (continued)
