ADJ-3
SECTION 3 ADJUSTMENTS
1. 1. 2. Adjustment procedure
This adjustment should be taken in order of G-panel, R-panel, and B-panel.
1. Select the internal test pattern signal “All black” from the projector’s menu “Menu -> Setting -> Test pattern”.
2. Loosen each screw (C) on the polarizer fholder.
3 Turn the lever of G-polarizer to obtain the darkest brightness and proper black color uniformity on the screen.
4. Adjust for R-polarizing glass and B-polarizing glass continuously.
5. After finishing, Tighten the screws (C) to fix the polarizer.
* This adjustment should be taken in the dark room to adjust precisely.
Lever of polarizer
1. 2. Electrical Convergence Adjustment
This is a function to correct a convergence by a pixel unit every R/G/B
ingredient.
Each pixel can be shifted in 1 dot and 2 dots maximum from right to left and
up and down.
1. Project cross-hatch pattern, confirm a position gap of R/G/B.
2. Enter the service mode, and select sub menu "CONVERGENCE" of
main menu "EXTRA OPTION".
3. Select a color to be adjusted.
4. Press the ▲ ▼ button to adjust the vertical direction, press the
t
u
button to adjust the horizontal direction.
5. Adjustment is complete. Press the [MENU] button to exit the adjustment
mode. The setting value will stored this time.
(;75$237231
6(/)&+(&.
)/,&.(5$'-867
6+877(523(1
21
21
32:(52))0(66$*(
&219(5*(1&(
02'(/
&/2*6(1625&$/,%5$5,21
:,1'2:('*(&$/,%5$7,21
6*0
0(186(/(&7
68%0(18
(17(5
ȣȯȮȶȥȲȧȥȮȣȥ
ȲȥȤ
ȧȲȥȥȮ
ȢȬȵȥ
ȭȥȮȵȀȳȥȬȥȣȴ
ȳȵȢȀȭȥȮȵ
ȥȮȴȥȲ
ȲȥȤ
ȶȥȲȴȩȣȡȬ
ȨȯȲȩȺȯȮȴȡȬ
Ȑ
Ȑ
ȡȤȪȵȳȴ
C
C
C
Summary of Contents for PT-EZ770Z
Page 8: ...8 PREFACE...
