S
P
E
C
F
I
L
E
PT-
EX12K
LCD Projector
As of February 2012
SFL12M001-1
1 5 / 1 6
Notes on projector placement and operation
The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.
1.
Make sure there is an unobstructed space of 1,000 mm (3 feet 3 inches) or more around the pro-
jector.
2.
Do not stack projector units directly on top of one another for the purpose of multiple (stacked)
projection. When stacking projector units, be sure to provide the amount of space indicated below
between them.
3.
Make sure that nothing blocks the projector’s air intake and exhaust openings. Also, install the pro-
jector so that cool or hot air from other air conditioning equipment does not flow directly toward the
projector’s air intake or exhaust openings.
4.
Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed
space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the
intake opening. This may cause the projector’s protective circuit to interrupt projector operation.
5.
If the projector is installed in an enclosed space, ensure that the projector’s intake and exhaust
openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is
not sucked into the intake openings.
1,000 mm ( 3 f t 3 in )
or more
1,000 mm ( 3 f t 3 in )
or more
1,000 mm ( 3 f t 3 in )
or more
1,000 mm
( 3 f t 3 in )
or more
Intake
Exhaust
Direction of air intake and exhaust
