manualshive.com logo in svg

Panasonic PT-DZ770EL, Operating Instructions (Functional Manual)

Share
Download
Panasonic PT-DZ770EL Operating Instructions (Functional Manual) Download Page 89

[NETWORK] menu

ENGLISH - 89

Settings

▶

■

[Network status] page

Click [Status] → [Network status].

The current network setting status is displayed.

▶

■

[Access error log] page

Click [Status] → [Access error log].

The error log on the WEB server is displayed such as access to the pages that do not exist or access with 

unauthorized user names or passwords.

▶

■

[Access log] page

Click [Status] → [Access log].

The log such as user name accessed to the WEB control page, accessed IP address, accessed time is 

displayed.

Note

 

z

[Access error log]/[Access log] will display the recent few thousand accesses/requests. May be unable to 

display all information when many accesses/requests are made at one time.

 

z

When [Access error log]/[Access log] exceeds a certain amount, old information will be erased.

 

z

Confirm [Access error log]/[Access log] periodically.

Summary of Contents for PT-DZ770EL





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands