S
P
E
C
F
I
L
E
PT-
DZ21K
3-Chip DLP
™
Projector
As of September 2012
SFD12M005-1
4 / 1 9
REMOTE 2 IN
LAN
Power cord length
Cabinet materials
Dimensions (W × H × D):
Weight*
7
Operation noise*
2
Operating temperature
Operating humidity
Remote control unit
Power supply
Operation range*
9
Dimensions (W × H × D)
Weight
Supplied accessories
Optional accessories
Zoom lens (0.9 – 1.1:1)
Zoom lens (1.3 – 1.7:1)
Zoom lens (1.7– 2.4:1)
Zoom lens (2.4 – 4.7:1)
Zoom lens (4.6 – 7.4:1)
Zoom lens (7.3 – 13.8:1)
Fixed-focus lens (0.7:1)
Lens motor cover
Ceiling mount bracket
Frame
Smoke cut filter
Upgrade kit
Replacement lamp unit
Replacement lamp unit for portrait mode
Replacement filter unit
D-sub 9-pin × 1 for external control (parallel)
RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant
with PJLink™ (class 1)
3.0 m (9
ft
10 in)
Molded plastic
620 × 291*
5
× 800 *
6
mm
(24-7/16 × 11-15/32 *
5
× 31-1/2 *
6
inches) (without lens)
Approx. 43 kg (94.8 lbs) (without lens)
49 dB (quad lamp operation)
0°– 45°C (32°–113°F) *
8
10%– 80% (no condensation)
3 V DC (AA type battery × 2)
Approx. 30 m (98
ft
5 in) when operated from directly in front of the
signal receptor
51 × 176 × 28 mm (2 × 6-15/16 × 1-3/32 inches)
Approx. 134 g (4.7 oz) (including batteries)
Power cord with security lock (× 1)
Wireless/wired remote control unit (× 1)
Batteries for remote control (AA type × 2)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
& Control Software) (× 1)
ET-D75LE6
ET-D75LE10
ET-D75LE20
ET-D75LE30
ET-D75LE40
ET-D75LE8
ET-D75LE50
ET-D75MC1
ET-PKD510H (for high ceilings)
ET-PKD510S (for low ceilings)
ET-PFD510
ET-SFR510
ET-UK20
ET-LAD510 (one bulb)
ET-LAD510F (a set of four bulbs)
ET-LAD510P (one bulb)
ET-LAD510PF (a set of four bulbs)
ET-EMF510
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
*1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output termi-
nal cannot be used. Also, only certain commands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 Up to a total of ±55° during simultaneous horizontal and vertical correction.
*4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*5 With legs at shortest position.
*6 Excluding the optional lens.
*7 Average value (excluding the optional lens). May differ depending on models.
*8 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the
FAN CONTROL
is set to
HIGH ALTITUDE MODE
(for altitudes from 1,400 m
to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke Cut Filter, the operating temperature
range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude. The operating temperature range is 0 °C to
40 °C (32 °F to 104 °F) when the ET-LAD510P/LAD510PF lamp is mounted and the projector is used in portrait configuration. The operating tem-
perature range is 0 °C to 35 °C (32 °F to 95 °F) when the
FAN CONTROL
is set to
HIGH ALTITUDE MODE
(for altitudes from 1,400 m to 2,700 m (4,593 ft
to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke Cut Filter, the operating temperature range is 0 °C to 30 °C
(32 °F to 86 °F).
*9 Operation range differs depending on environments.
