[PROJECTOR SETUP] menu
66 - ENGLISH
Settings
[LOAD ALL USER DATA]
You can load the various setting values saved as a
backup in the built-in memory of the projector.
1) Press
▲▼
to select [LOAD ALL USER
DATA].
2) Press the <ENTER> button.
z
The
[SECURITY PASSWORD]
screen is
displayed.
3) Enter the security password and press
the <ENTER> button.
4) When the con
fi
rmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
Note
z
The projector will go into the standby status to
re
fl
ect the setting values when [LOAD ALL USER
DATA] is executed.
[INITIALIZE]
You can return various setting values to their factory
default settings.
1) Press
▲▼
to select [INITIALIZE].
2) Press the <ENTER> button.
z
The
[SECURITY PASSWORD]
screen is
displayed.
3) Enter the security password and press
the <ENTER> button.
z
The
[INITIALIZE]
screen is displayed.
4) Press
▲▼
to select the item to
initialize.
[ALL USER
DATA]
Restores all the setting values
including the registered signal, the
network settings, E-mail settings,
and the logo image to their factory
default settings.
The projector will go into the
standby status to re
fl
ect the setting
values.
[ENTRY
SIGNAL]
Deletes all the setting values saved
for each input signal.
To delete only a part of the
registered signal, perform the
procedure described in “Deleting a
registered data” (
page 68).
[NETWORK/
E-MAIL]
Restores the network settings and
the E-mail settings to their factory
default settings.
[LOGO IMAGE]
Deletes the image registered in
[USER LOGO].
5) Press the <ENTER> button.
6) When the con
fi
rmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
[SERVICE PASSWORD]
Used by a service person.
