ENGLISH
–
61
Basic Operation
Press
◄►
to adjust the
3.
correction amount.
The value changes from -127 to 127.
•
Press
▲▼
to select “SUB
4.
KEYSTONE” or “LINEARITY”.
Press
◄►
to adjust the
5.
correction amount.
The value changes from -127 to 127.
•
Note
Adjust the “SUB KEYSTONE” or “LINEARITY” after
•
adjusting the “KEYSTONE”.
The variable range of the “SUB KEYSTONE” or
“LINEARITY” changes in response to the adjusted
value of the “KEYSTONE”.
“SUB KEYSTONE” is a function which is used to
•
correct keystone distortion when the lens has been
shifted to the left or right. Keystone correction can
only be carried out for the area at the top-right of
the screen. However, this adjustment cannot be
used when “KEYSTONE” is set to “0”.
Pressing DEFAULT of the remote control will
•
restore the factory default (“KEYSTONE”: 0, “SUB
KEYSTONE”: 0, “LINEARITY”: 0).
The adjusted value is reflected in other input
•
signals.
Keystone distortion can be corrected to
±
40
°
of
•
the angle of tilt for the projector against the screen.
(The range for the angle of elevation is within
±
22
°
when using a lens with a fixed focal point, and it is
within
±
28
°
when using an LE6 lens.)
If keystone correction is used, edge blending
•
adjustment cannot be performed properly.
