Brightness
&
Picture Quality
Compact Yet Bright
Panasonic’s original dual-lamp system, with its
355-W lamp, has helped to make the body
approximately 49% smaller than Panasonic’s
original PT-D10000 Series, while providing a full
10,600 lm
*
1
of brightness.
Dynamic Iris for a High 10,000:1
*
2
Contrast Ratio
Panasonic’s Dynamic Iris
uses a scene-linking
aperture mechanism to
achieve a remarkable
10,000:1
*
2
contrast without
lowering its high brightness.
This helps to reproduce
deeper, richer blacks, and
provides images with more
detailed textures.
Detail Clarity Processor 3 Brings Depth
and Clarity to Details
The frequency of the video signal is analysed for
each scene, and distribution data is extracted
for the ultrahigh, high, medium and low range
frequencies. This unique Panasonic image correc-
tion circuit optimally enhances each area of the
screen. High-precision detection is applied from
2-dimensional horizontal/vertical data to produce
more natural, lifelike images with high definition.
System Daylight View 2 for Enhanced
Colour Perception
This original Panasonic technology epitomises
image quality to improve colour perception of the
projected image in bright rooms. Gamma curves
and sharpness, in addition to conventional colour
correction, are adjusted to bring a sense of sharp-
ness to the entire screen and reproduce stunning
images with lifelike depth. This results in highly
comfortable viewing even in bright lighting, and
allows viewers to concentrate easily on the images.
Waveform Monitor Function
(PT-DZ110XE)
When the output level of the source device fluctu-
ates due to the performance of the device or its
cable connections, the original black and white
levels of the image content cannot be reproduced
correctly. With the PT-DZ110XE you can view the
waveforms on the screen and adjust the settings
either automatically or manually as you prefer.
DICOM Simulation Mode
*
3
This imaging mode is similar to DICOM part 14,
which is a medical imaging standard. It repro-
duces X-ray images with remarkable clarity. It also
allows information to be shared by many viewers
on a large screen, such as during conferences or
training courses.
Full-HD Ready WUXGA Resolution
(PT-DZ110XE)
In response to the increasing popularity of wide-
screen image viewing, including Blu-ray content,
the PT-DZ110XE features native WUXGA resolution
for full-HD viewing. This brings you lifelike projec-
tion of intricate, highly detailed images.
Advanced Technologies for Excellent
Image Quality
• 3D colour management system
• Full 10-bit image processing
• Progressive cinema scan (3:2 pulldown)
• Dynamic sharpness control
• Digital noise reduction
• IP conversion
• AI scene control
• 2:2 pulldown mode
• 3D Y/C separation
• sRGB compatibility
Reliability
&
Stability
Panasonic’s Original Dual Lamp System
This system eliminates the interruption if a lamp
should fail (in dual-lamp operation mode). The
Lamp Relay mode also operates the lamps alter-
nately to enable 24/7 projection.
Auto Cleaning Filter Reduces
Maintenance Hassles
Panasonic’s proprietary Auto Cleaning Filter (ACF)
automatically exposes a clean filter surface when
it senses that the filter is clogged. The ACF also
brushes away dust that adheres to the filter, which
helps prevent clogging that can impair operation
or cause malfunction. This helps maintain the
superior dust-collecting performance of the Micro
Cut Filter, which is a highly efficient electrostatic
filter. As a result, the
filter does not need to
be replaced for up to
10,000 hours
*
5
or more,
greatly reducing the
hassle of maintenance.
Optional Smoke Cut Filter ET-SFD310
The projector can be equipped with an optional,
extra-strong air filter to prevent the entry of
smoke, such as those used for special effects at
events and stage performances.
Quiet 37-dB
*
6
Operation
An original cooling system enhances the compact
body and enables the projector to operate at a
silent 37 dB.
Without System Daylight View 2
PT-DZ110X Series with System
Daylight View 2
Without Detail Clarity Processor 3
PT-DZ110X Series with Detail Clarity Processor 3
Before
White Level Adjustment
Black Level Adjustment
Before
After
After
Normal mode
DICOM Simulation Mode
Lamp
Brightness (lumens)
Lamp
replacement
cycle (hours)
*
4
PT-DZ110XE
PT-DS100XE
PT-DW90XE
Two lamps (high)
10,600
9,600
3,000
Two lamps (low)
8,480
7,680
4,000
One lamp (high)
5,300
4,800
6,000
One lamp (low)
4,240
3,840
8,000
ACF filter unit
Smoke Cut
Filter
ET-SFD310
NOTES
*1
The PT-DW90XE has 9,600 lm of brightness.
*2
In Dynamic Iris mode 3.
*3
This product is not
a medical instrument. Do not use it for actual
medical diagnosis.
*4
The values above are maxi-
mum values when they are used in cycles of being
turned on for 2 hours and off for 0.25 hour. When
the lamps are turned on and off more frequently,
the lamp replacement cycle is shortened. It is rec-
ommended that the mechanical shutter be used to
turn images off for a short period.
*5
The usage
environment influences the duration of the filter.
*6
In dual lamp operation, with lamp low mode.
Measurement, measuring conditions, and method
of notation all comply with ISO 21118 international
standards.
2
