Panasonic PT-D7600, Spec File

Page: 2 / 7

2
PT-D7600
DLP™-Based Projector
S P E C F I L E
Specifications
Main Unit
Power supply: 220 – 240 V AC, 50/60 Hz
Power consumption: 800 W (800 VA) (12 W during standby mode with fan stopped)
DMD™ device: Panel size: 0.9 ˝ diagonal (5:4 aspect ratio)
Display method: DMD™ (x 3, R/G/B), DLP™ system
Pixels: 1,310,720 (1,280 x 1,024) x 3, total of 3,932,160 pixels
Lens: Optional powered zoom/focus lenses
Lamp: 300 W UHM™ lamps (x 2) (BriteOptic™ Dual Lamp System)
Screen size: 70 – 600 inches (1,778 –15,240 mm) diagonally (5:4 aspect ratio)
* 70 – 300 inches (1,778 –7,620 mm) diagonally (5:4 aspect
ratio) with the ET-D75LE5
Brightness : 6,000 lumens (dual lamp, high power mode)
Centre-to-corner uniformity ratio: 90%
Contrast: 1,000:1 (full on/full off, high contrast mode, with a high-contrast lens)
(brightness: 4,500 lumens)
600:1 (full on/full off, normal contrast mode with a standard lens
Resolution: RGB: 1,280 x 1,024 pixels
(1,600 x 1,200 pixels compatible, compression mode)
Video: 560 TV lines
Scanning frequency: RGB: Horizontal: 15 –100 kHz, Vertical: 24 –120 Hz,
Dot clock: 20 –162 MHz
* Images may not be normally displayed when projecting moving pic-
tures with vertical frequency which is not between 45 Hz and 61 Hz.
YP
B
P
R
(YC
B
C
R
): 480i: f
H
15.75 kHz; f
V
60 Hz, 576i: f
H
15.63 kHz; f
V
50 Hz,
480p: f
H
31.5 kHz; f
V
60 Hz, 576p: f
H
31.25 kHz; f
V
50 Hz,
720/60p: f
H
45 kHz; f
V
60 Hz, 1035/60i: f
H
33.75 kHz; f
V
60 Hz,
1080/60i: f
H
33.75 kHz; f
V
60 Hz, 1080/50i: f
H
28.13 kHz; f
V
50 Hz,
1080/25p: f
H
28.13 kHz; f
V
25 Hz, 1080/24p: f
H
27 kHz; f
V
24 Hz,
1080/24sF: f
H
27 kHz; f
V
48 Hz, 1080/30p: f
H
33.75 kHz; f
V
30 Hz
S-Video/Video: Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz,
(PAL, PAL60, PAL-M, PAL-N, SECAM, NTSC, NTSC4.43)
Optical axis shift: Horizontal and vertical (powered)
Keystone correction range: Vertical: ±40° (±22° with the ET-D75LE5)
Installation: Ceiling/desk, front/rear
Terminals: RGB1 IN: BNC x 5
R, G, B: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 Ω ,
HD/VD/SYNC: 1.4 Vp-p – 5.0Vp-p, 75 Ω (positive/negative)
Y, P
B
, P
R
: Y: 1.0 p-p, 75 Ω , P
B,/
P
R
: 0.7 Vp-p, 75 Ω
RGB2 IN/RGB1 OUT: D-sub HD 15-pin x 1, IN/OUT selection is operated with on-screen menu.
R, G, B: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 Ω ,
HD/VD/SYNC: 75 Ω , TTL (positive/negative polarity)
Y, P
B
, P
R
: Y: 1.0 p-p, 75 Ω , P
B,/
P
R
: 0.7 Vp-p, 75 Ω
VIDEO IN: BNC x 1, 1.0 Vp-p, 75 Ω
VIDEO OUT: BNC x 1, 1.0 Vp-p, 75 Ω , active through
S-VIDEO IN: Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 Ω
SERIAL IN: D-sub 9-pin x 1 (RS-232C/422 compliant) for external controller
SERIAL OUT: D-sub 9-pin x 1 (RS-232C/422 compliant) for external controller
REMOTE 1 IN: M3 jack x 1 for wired remote control or link control
REMOTE 1 OUT: M3 jack x 1 for wired remote control or link control
REMOTE 2 IN: D-sub 9-pin x 1 for external control (parallel)
Optional board slot: x 1
ET-MD95RGB
RGB/YP
B
P
R
IN: BNC x 5
R, G, B: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 Ω ,
HD (H) / SYNC (H•V) • VD (V): 75 Ω , TTL (positive/negative)
Y, P
B
, P
R
: Y: 1.0 p-p, 75 Ω , P
B,/
P
R
: 0.7 Vp-p, 75 Ω , BETACAM compatible
ET-MD95VM2
VIDEO BNC x 2 (IN, OUT)
VIDEO IN: 1.0 Vp-p, 75 Ω or high impedance (auto selection)
VIDEO OUT: 1.0 Vp-p, 75 Ω or high impedance (auto selection)
S-VIDEO IN: BNC x 2 (Y, C)
Y, C: Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 Ω
YC
B
C
R
IN: (BNC x 3, common with VIDEO and S-VIDEO connectors)
Y, C
B
, C
R
: Y: 1.0 p-p, 75 Ω , P
B,/
P
R
: 0.7 Vp-p, 75 Ω
As of April 2004