Panasonic PT-CW240E Operating Instructions Manual Download

Page: 49 / 74

LAN

ENGLISH -

Settings

The projector has a network fuction, and the following operations are available from the computer using the web

browser control.

Setting and adjustment of the projector.

Display of the projector status.

Transmission of an E-mail message when there is a problem with the projector.

This projector supports "Crestron RoomView" and the following application software from Crestron company.

(

page 53)



RoomView Express

Attention

Connects LAN to indoor equipment.

The positions of the <COMPUTER 1 IN> and <LAN> terminals are close to each other. Therefore, when connecting

cables to both terminals, removing the cable connected to the <LAN> terminal may be difficult. When removing the cable

connected to the <LAN> terminal, remove the cable connected to the <COMPUTER 1 IN> terminal beforehand.

Note

A LAN cable is required to use the wired LAN function.

Computer

Projector

LAN cable (straight)

Hub

Connect to Network

A Web browser is required to use this function. Confirm that the Web browser can be used beforehand.

Compatible OS : Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6/v10.7

Compatible Web Browser : Internet Explorer 7.0/8.0/9.0, Safari 4.0/5.0 (Mac OS)

Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be

used beforehand.

Use shielded LAN cable (STP cable) that is compatible with category 5 or above.

Use a LAN cable with length of 100m or shorter.

Name and function of network function parts

(1) LINK lamp (yellow)

Lights on when connected.

(2) LAN terminal (10BASE-T/100BASE-TX)

Used to connect the LAN cable here.

(3) ACT lamp (green)

Blinks when transmitting/receiving data.

(1) (2) (3)

Summary of Contents for PT-CW240E











































































Search results

Summary of Contents for PT-CW240E

Reviews:

Related manuals for PT-CW240E

Brands by name

Popular brands

Panasonic PT-CW240E, Operating Instructions Manual

Search results

Summary of Contents for PT-CW240E

Reviews:

Related manuals for PT-CW240E

Brands by name

Popular brands