E
NGLISH
-15
Preparation
14-E
NGLISH
*
) (
'
#
%
&
$
)
(
&
*
.
/
'
-
2
1
+
0
,
Projector control panel
Remote control unit
#
Power indicator
(pages 24, 26 and 27)
This indicator illuminates red when the main power is switched on (standby
mode), and it illuminates green when a picture starts to be projected.
$
LAMP indicator
(page 49)
This indicator illuminates when it is time to replace the lamp unit. It flashes
if a circuit abnormality is detected.
%
TEMP indicator
(page 48)
This indicator illuminates if an abnormally high temperature is detected
inside the projector. If the temperature rises above a certain level, the
power supply will be turned off automatically and the indicator will flash.
&
Arrow (
F
F
,
G
G
,
I
I
and
H
H
) buttons
(page 38)
These buttons are used to select and adjust items in the on-screen menus.
'
ENTER button
(page 38)
This button is used to accept and to activate items selected in the
on-screen menus.
(
MENU button
(page 36)
This button is used to display the “MAIN MENU”. When a menu screen is being
displayed, it can be used to return to a previous screen or to clear the screen.
)
INPUT select buttons
(page 25)
These buttons are used to switch the input signals from the connected equipment.
*
POWER button
(pages 24 and 26)
+
LIGHT button
(page 29)
This button is used to illuminate the buttons on the remote control unit.
,
KEYSTONE button
(page 28)
This button is used to correct keystone distortion of the projected image
when the projector position is tilted upward or downward.
-
FREEZE button
(page 28)
This button is used to momentarily freeze projection so that a still picture is
displayed.
.
PICTURE MODE button
(page 29)
Pressing this button will change the picture mode.
/
USER MEMORY button
(page 35)
This button is used to display the “MEMORY LOAD” menu.
0
COLOR MANAGEMENT button
(page 32)
This button is used to display the “COLOR MNGMT” menu.
1
ASPECT button
(page 30)
This button is used for aspect adjustment (vertical and horizontal
proportions).
2
NORMAL button
(page 39)
This button is used to reset the projector adjustment values to the factory
default settings.