Panasonic PT-AE4000E Functional Instructions Download

Page: 5 / 50

Setting up

NGLISH - 5

Projection method

You can use the projector with any of the following 4 projection methods. To set the projector in the desired

method, see “INSTALLATION” on page 39.

Setting on a desk/floor and

projecting from front

Setting on a desk/floor and

projecting from rear

INSTALLATION:

FRONT/DESK

INSTALLATION:

REAR/DESK

Mounting on the ceiling and

projecting from front

Mounting on the ceiling and

projecting from rear

INSTALLATION:

FRONT/CEILING

INSTALLATION:

REAR/CEILING

NOTE:

A translucent screen is required for rear projection.

•

When mounting the projector on the ceiling, the optional ceiling mount bracket (ET-PKE2000, ET-PKE1000S) is required.

•

See “Ceiling mount bracket safeguards” in “Technical Information” of the operating instructions.

•

Front leg adjusters and throwing angle

You can screw up/down the front leg adjusters to control the angle of the projector for adjusting the throwing angle.

See “Positioning the image” on page 12.

NOTE:

Heated air comes out of the air exhaust port. Do not touch the air exhaust port directly.

•

If keystone distortion occurs, see “KEYSTONE” on page

•

34.

Screw up the front leg adjusters, and an audible click will be heard as the limit.

•

Summary of Contents for PT-AE4000E



















































Search results

Summary of Contents for PT-AE4000E

Reviews:

Related manuals for PT-AE4000E

Brands by name

Popular brands

Panasonic PT-AE4000E, Functional Instructions

Search results

Summary of Contents for PT-AE4000E

Reviews:

Related manuals for PT-AE4000E

Brands by name

Popular brands