Panasonic PT-AE4000 Functional Instructions Download

Page: 35 / 50

NGLISH - 35

LENS CONTROL

Remote control

Control panel

See “Navigating through the MENU” on page

16.

See “Menu list” on page

17.

NOTE:

The saved lens memory adjustment accuracy is not

•

guaranteed.

If the memorised

•

ZOOM/FOCUS

adjustment is not

accurate enough, adjust the

ZOOM/FOCUS

again.

If the power supply is stopped while loading or saving

•

the lens memory, saved adjusted settings may differ

from the original after restarting the projector. Adjust

the

ZOOM/FOCUS

menu again.

ZOOM/FOCUS

You can use the 2 different test patterns to adjust the

focus and zoom of the image.

Press the

ENTER

button to display test pattern 1.

Press ▲ ▼ to adjust the focus and ◄ ► to adjust

the zoom.

PATTERN CHANGE

RETURN

FOCUS

ZOOM

Press the

ENTER

button to display test pattern 2.

Press ▲ ▼ to adjust the focus and ◄ ► to adjust

the zoom.

PATTERN CHANGE

RETURN

FOCUS

ZOOM

Press the

ENTER

button to display the projected

image.

You can confirm the adjustment is fit to the projected

image.

Press the

MENU

RETURN

button to return to

the previous menu, or press repeatedly to escape

the menu mode.

NOTE:

When the projector and/or the screen is tilted, adjust

•

the focus at the centre of the image. The upper and

lower edge might be out of focus.

When the image is distorted in keystone, adjust the

•

KEYSTONE

POSITION

menu. See “KEYSTONE” on

page 34.

LENS MEMORY LOAD

You can access the saved lens control settings (

ZOOM

FOCUS

AREA

POSITION

, and

MASKING AREA

)

instantly.

Select a setting from

LENS MEMORY 1 - 6

Press the

ENTER

button to activate.

LENS MEMORY1

LENS MEMORY2
LENS MEMORY3
LENS MEMORY4
LENS MEMORY5
LENS MEMORY6

NOTE:

The option that contains no saved adjustment will not

•

be displayed.

If there is no saved setting, the

•

LENS MEMORY LOAD

menu will not be selectable.

LENS MEMORY SAVE

You can save and name the adjusted lens control

settings in the

LENS MEMORY

LENS MEMORY1

LENS MEMORY2
LENS MEMORY3
LENS MEMORY4
LENS MEMORY5
LENS MEMORY6

Indicated with

is in use, and is empty.

Adjust

ZOOM/FOCUS

V-AREA POSITION

and

MASKING AREA

Select the

LENS MEMORY SAVE

and press the

ENTER

button.

Select the required memory setting and press the

ENTER

button.

The confirmation screen will be displayed. Select

and press the

ENTER

button.

Name the lens memory setting.

Use ▲ ▼ ◄ ► to specify the location of the required

character to enter and press the

ENTER

button.

CANCEL

ALL DELETE

LENS MEMORY NAME INPUT

Summary of Contents for PT-AE4000



















































Search results

Summary of Contents for PT-AE4000

Reviews:

Related manuals for PT-AE4000

Brands by name

Popular brands

Panasonic PT-AE4000, Functional Instructions

Search results

Summary of Contents for PT-AE4000

Reviews:

Related manuals for PT-AE4000

Brands by name

Popular brands