Panasonic PT AE2000U - LCD Projector - HD 1080p Operating Instructions Manual Download | Manualshive

Page: 43 / 58

background image

E

NGLISH - 43

Maintenance

Care and Replacement

J

Before cleaning the projector

Switch off the

MAIN POWER

switch in proper way and disconnect the power plug from the wall outlet.

Unplug all the cables from the projector.

J

Cleaning the outer surface of the projector

Wipe off dirt and dust gently with a soft cloth.

If it is difficult to remove the dirt, soak a cloth in a neutral detergent diluted with water, wring the cloth well and then wipe
the projector. Dry off the projector with dry cloth.

If you use a chemical treated wipe, follow the instructions supplied with it.

J

Cleaning the lens surface

Wipe off dirt and dust gently with a lint-free cloth.

Make sure no dirt or dust remains on the surface of the lens. It will be enlarged and projected onto a screen.

J

Cleaning the air filter

If the air filter is excessively dirty, the internal temperature of the projector increases and may cause
malfunction. Clean the air filter regularly every 100 hours of usage.

1. Place a finger at the bottom of the air filter
2. Slightly push up and pull out the air filter to remove.

3. Vacuum dirt and dust from the air filter.

Do not wash the air filter.

4. Place and slightly slide in the air filter in the air intake port to attach.

Make sure the air filter clicks into the place.

J

Replacing the air filter

The air filter should be replaced when cleaning is ineffective and when replacing the lamp unit. A replacement
air filter is provided with a replacement lamp unit, ET-LAE1000. Contact an Authorized Service Center for the
optional air filter.

Cleaning the projector

NOTE:

• Do not use the projector without attaching the air filter.

«
...
41
42
43
44
45
...
»

Summary of Contents for PT AE2000U - LCD Projector - HD 1080p



























































Reviews:

No comments

Related manuals for PT AE2000U - LCD Projector - HD 1080p

Brand: Panamax Pages: 3

Carousel S-AV28

Brand: Kodak Pages: 8

PJ1165 - XGA LCD Projector

Brand: ViewSonic Pages: 52

Brand: ProLights Pages: 28

Brand: ViewSonic Pages: 43

Brand: Eaton Pages: 10

Brand: InFocus Pages: 8

Brand: Lenovo Pages: 11

Brand: Lenovo Pages: 36

Brand: LG Pages: 69

Brand: LG Pages: 68

Brand: LG Pages: 34

Brand: LG Pages: 72

Brand: LG Pages: 8

Brand: LG Pages: 78

Brand: LG Pages: 4

RD-JT40 1024X768 XGA

Brand: LG Pages: 90

Brand: LG Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands