manualshive.com logo in svg

Panasonic PT-AE1000U - LCD Projector - HD 1080p, Operating Instructions Manual

Share
Download
Panasonic PT-AE1000U - LCD Projector - HD 1080p Operating Instructions Manual Download Page 19

E

NGLISH

 - 19

Basic Op

eratio

n

Switching the projector on/off

Ensure all the input devices are connected and turned off before connecting the 

Power cord

.

J

Connecting

Make sure to use the 

Power cord

 which is 

provided with the projector.

1. Ensure the shape of the 

power cord plug and the 

AC IN

 connector on the 

side of the projector match, then push the 
plug all the way in.

2. Connect the 

Power cord

 to a wall outlet.

J

Disconnecting

Make sure the 

MAIN POWER

 is switched off

.

1. Hold the plug and unplug the 

Power cord

 

from the wall outlet.

2. Hold the plug and unplug the 

Power cord

 

from the 

AC IN

 connector on the side of the 

projector.

Power cord

NOTE:

 

Do not force the connector as this may damage the projector and/or the power cord.

 

Dirt or dust build-up around plugs may cause fire or electrical hazards.

 

Switch off the power to the projector when not in use.

POWER indicator

Indicator status

Status

No illumination or flashing

The 

MAIN POWER

 is switched off.

RED

Lit

The 

MAIN POWER

 is switched on and the projector is in standby.

GREEN

Flashing

The 

POWER

 is switched on and the projector is getting ready to project.

Lit

The projector is ready to project.

ORANGE

Lit

The 

POWER

 is switched off and the projector is cooling the lamp.

Flashing

The 

POWER

 is switched on again when cooling the lamp and recovering 

to projection mode. Recovery may take a while.

NOTE:

 

While the projector is cooling the lamp, do not switch the 

MAIN POWER

 off or unplug the 

Power cord

.

 

The electric consumption in standby mode is 0.08 W.

POWER

 indicator

PT-AE1000U.book  Page 19  Monday, October 16, 2006  1:40 PM

Summary of Contents for PT-AE1000U - LCD Projector - HD 1080p

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands