9
Installation
Antenna Connection (Cable Box, no VCR)
Use this configuration when connecting the projection TV to a cable TV system using a Cable Box.
ANT1
ANT2
SPLIT
OUT
ANT INPUT
ANT OUTPUT
Incoming Cable from Antenna
or Cable TV System
Connect the cable from the antenna
or cable system to the ANT1 terminal
on the back of the projection TV.
ANTENNA TERMINALS ON THE
BACK OF THE PROJECTION TV
CABLE BOX
TERMINAL ON
THE BACK OF
THE CABLE BOX
Notes:
(1) When the antenna cable is connected to the projection TV antenna terminal via a cable box or VCR, set the TV channel
to CH3 or CH4 cable, after select ANT2 in the PROGRAM CHANNELS. (See page 23) This does not apply when
signal is input from VIDEO INPUT.
(2) To use special features such as Favorite Channel Captions, ANT1 must be selected in the PROGRAM CHANNELS.
(See page 23)
Antenna Connection (Cable Box, and VCR)
Use this configuration when connecting the projection TV to a cable TV system using a Cable Box and VCR.
ANT1
ANT2
SPLIT
OUT
ANT INPUT ANT OUTPUT
ANT INPUT
ANT OUTPUT
S VIDEO VIDEO
OUTPUT
L-AUDIO-R
Connect the cable from the
Output terminal on the back
of the Cable Box to the
Antenna input terminal on the
back of the VCR.
VCR
ANTENNA TERMINALS ON THE
BACK OF THE PROJECTION TV
Connect the cable
from the antenna or
cable system to the
ANT1 terminal on
t h e b a c k o f t h e
projection TV.
CABLE BOX
TO VCR
TERMINAL ON
THE BACK OF
THE CABLE BOX
Incoming Cable
from Antenna
or Cable TV
System
Connect the cable from the antenna or cable
system to the Input terminal on the back of
the CABLE BOX.
