- 26 -
Schematic Notes
P
ART
S LI
ST
1.
RESISTOR
Unit of resistance is ohm (
Ω), (
K=1,000, M=1,000,000)
2.
CAPACITOR
Unit of capacitance is
µ
F, unless otherwise noted.
SERVICE NOTES:
This PTV has a section that does not share a common ground with the power supply section. The different sections are
referred to as HOT section and COLD section in the precautions below.
1.
Do not probe HOT and COLD sections at the same time. You may receive an electric shock.
2.
Do not short HOT section to COLD section. That could blow the fuse or damage components.
3.
Never measure HOT and COLD sections at the same time when using tools such as oscilloscopes or multi meters.
4.
Always unplug the unit before beginning any operation such as removing the chassis.
Non Flammable
Solid
Metal Oxide
Metal (Precision and high stability)
Wire Wound
Thermistor
Fusible
Positive coefficient Thermistor
Flame Proof Rectangular
Electrolytic
Metallized Polyester
Tantalum
Polypropylene
Bipolar
Mica
Polystyrene
Ceramic
Temperature Compensation
Ceramic (SL)
Polyester
+
-
m
NP
S
M
Summary of Contents for PT- 47WX49E
