18
For assistance, please call : 1-888-VIEW PTV(843-9788)
How to connect the PC Input Terminals
Signal Names for D-SUB 15P Connector
Pin Layout for PC Input
Terminal
Notes:
• Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB
15P) to connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT
compatible D-SUB 15P terminal.
• The computer shown in the illustration is for example purposes only. Additional equipment and cables shown are not
supplied with this set.
• The picture will become dark if an RGB signal with a vertical scanning frequency of 62 Hz is input. To obtain the
optimum picture quality with the projection display, a vertical scanning frequency of 60 Hz is recommended.
• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified
frequency range.
• Select the desired RGB input position by pressing the TV/VIDEO button. (P. 33)
Installation
PC audio cable (M3 stereo mini pin)
Connect a cable which matches
the audio output terminal on the computer.
Conversion adapter (If necessary)
RGB cable (D-SUB 15P)
COMPUTER
Pin No.
Signal name
1
R
2
G
3
B
4
NC
5
NC
6
Ground for R
7
Ground for G
8
Ground for B
Pin No.
Signal name
9
NC
10
Ground
11
NC
12
NC
13
HD/CSYNC
14
VD
15
NC
1
6
7
8
3
9
4
5
10
15 14 13 12 11
2
NC: Not connected
