Panasonic PP104078, Operating Instructions Manual

Page: 21 / 40

21
Notes :
¡
We shall not guarantee all the functions of the
Bluetooth
® device to be connected. When opera-
tions cannot be performed via this unit, operate
the system via the Bluetooth
® device.
¡
Be aware that the battery of a Bluetooth ® device
drains faster if the Bluetooth ® device is connected
to this unit.
¡
Even when the Bluetooth ® device that is con-
nected to this unit is located near this unit, sound
may be interrupted or noise may be generated.
¡
The Bluetooth ® device with over 5-digit PIN code
is not operated with this unit.
¡
“DISCONN.” (DISCONNECT) is displayed when
the Bluetooth
® device is disconnected.
Setting of PIN (Personal Identity Number) code
1
Hold down [6] for more than 2 seconds to
call the PIN code entry mode.
2
Press [6] to prepare for adjustment.
1st digit blinks
3
Enter a number for each digit.
[ s ]
/
[ d ]
: Selects number (0 – 9).
[6]
: Selects next digit to be entered.
Digit entered
4
Press [6] to determine the PIN code entry
when last digit is entered.
Completed
Connection of the registered Bluetooth
®
device to this unit
1
Press the preset button(s) [1] through [6] to
select the registration number of the Blue-
tooth
® device of interest. (Refer to the
above.)
2
Hold down [BAND] for more than 2 seconds
for connection.
The Bluetooth ® indicator ( ) lights.
Notes :
¡
Even if
[SRC]
(Source) is pressed to change the
source, the connection stays connected.
¡
Depending on the communication status, it may
takes 5 to 40 seconds for device connection.
Disconnection of the Bluetooth ® device
Hold down [BAND] for more than 2 seconds.
The Bluetooth ® indicator ( ) turns off.
Note : When the Bluetooth ® device is out of reception
range or encounter serious interference by outer
signal, “ERROR” appears and this unit will
automatically disconnect the connections.
Deletion of the registered data
1
Press the preset button(s) [1] through [6] to
select a registration number assigned to the
Bluetooth
® device whose data is to be
deleted. (Refer to the above.)
2
Hold down the preset button [1] through [5]
selected above for the registration number
for more than 2 seconds.
3
Press the preset button that was pressed at
the step above again.
4
Push [SEL] .
Deletion
completed
CQ̲BT5557U 10/11/25 10:26 ページ 21