OPERATION OF CONTROLS
3.Volume Control button
Turn left or right the spindle knob (3) to decrease or increase
the volume level. Switching on your radio automatically allows
you to set the volume level without having to select it first.
Simply turn the spindle knob to set the required level.
-
Bass control
Turn left to lower the bass.
Turn right to higher the bass.
-
Treble control
Turn left to lower the treble.
Turn right to higher the treble.
-
Balance control
Turn left to decrease the right speaker volume.
Turn right to increase the left speaker volume.
-
Fader control
Turn left to decrease the volume level of any loud speakers
connected front channel.
Turn right to increase the volume level of any loud speakers
connected rear channel.
4. "MODE" button
Press this button to select Radio or Tape mode.
5. Preset buttons
These buttons have a dual function, depending on how long
they are held in the depressed position. Use these buttons to
memorized or recall up to 18 FM and 12 AM station selections.
- To write operation
a.
Select desired band FM1/FM2/FM3 with the BND button
b.
Tune in desired radio station with the TUN UP ( ) or
TUN DOWN ( ) button.
c.
Press and hold depressed any one of the preset buttons
(1-6) for more than 2 seconds until number selection
appears on digital display, this indicates station has been
entered into the corresponding memory area.
Repeat the steps as above
a~c
to memorized each BAND
in preset buttons.
- To read operation
Press one of the preset buttons (1-6) for less than 2 seconds,
read the corresponding prest memory
6. Band function
Press the BND (6) button shortly to select the desired band
FM1, FM2, FM3, AM1 and AM2.
7. TUNE UP button
- FM/AM Seek up
Press shortly TUNE up button activate auto seek-up scale.
Press again to cancel the operation. Press seek-up longer
than 2 seconds to activate manual tuning up mode. Afer 3
seconds, if the keys are not pressed, they will return to auto
tuning mode.
- 3 -
18. PROGRAM Fast function
To advance the tape quickly push this button until the lock to
release gently press the opposite key.
To change the tape play direction press this button, the
display will show the direction and play.
Note:
When the tape reaches the end during playback it
automatically switches direction and continues to play.
19. EJECT button
To end tape play press this button (EJECT) fully home, the
unit will then reword to RADIO mode.
To play the tape back again, press MODE (4) button, then the
Tape start to running play.
20. RESET function
A microprocessor reset button has been provided to facilitate
manual resetting of the internal microprocessor. In the unlikely
event that the player fails to operate correctly, If you are faced
with a mal-function during the operation, simply press the
RESET
(20) button.
Note :
It will be necessary to re-enter the radio preset
memories as these will have been erased when the
microprocessor was reset. After resetting the player,
ensure all functions are operating correctly.
OPERATION OF CONTROLS
- 6 -
