195
Available commands are listed below.
N Display the values of the next port.
Press "N" to display the next page.
P
Display the values of the previous port.
Press "P" to display the previous page.
E
Change the transmission interval of EAP Requests.
Press "E." The command prompt changes to "Enter new interval>." Enter an
integer number between 1 and 3600 (seconds).
S
Change the EAP Request Mode status.
Press "S." The command prompt changes to "Enter port number>." Enter the
port number to be specified. After the entry, the command prompt changes to
"Enable or Disable EAP-Request ?(E/D)>." Press "E" to enable the EAP-Request.
Press "D" to disable it.
Q Return to the parent menu.