background image

10

Product Outline

1

Storage environment

Temperature: -20–70

°

C, Humidity: 10–90% RH (no condensation)

Mass (Weight)

2,300 g

External dimensions

44 mm (Height) × 210 mm (Width) × 260 mm (Depth) (Excluding 

protruding sections)

Operating environment

Temperature: 0–50°C, Humidity: 20–80% RH (no condensation)

*If it is used beyond the operating environmental temperatures, 

then the protective devices will start working and the Ethernet 

Switch power will be shut off.

Others

STP/RSTP/MSTP

Supports the IEEE802.1X authentication (MAC-based, port-based)

MAC authentication, WEB authentication, Triple authentication,

STEP authentication, IEEE802.1X supplicant,

Port monitoring, Ring protocol, IGMP snooping,

Loop detection/shutoff function, Storm control, DSCP mapping function,

Login RADIUS function, DHCP client function,

PoE scheduler function, PoE auto reboot function, 

Port grouping function, Multi-cast address group registration function

Power supply

AC 100-240 V, 50/60 Hz, 5.0 A

Power consumption

Normally, Max. 291 W (15.7 W when not supplying power), Min. 11.5 W

Silent fan control

The fan rpm can be set in accordance with the usage environments.

If the fan rpm are set, the maximum power supply will be 

automatically restricted. If the fan rpm (Fan Speed) are set to Low1, 

or Min, the device’s overall maximum power supply (Power Budget) 

will be automatically restricted to 180 W, and it can be used with the 

fan noise reduced.

(*2) The noise characteristics measuring values in the surrounding 

area while in each mode are in accordance with JIS X 7779, 

thus the performances of the average values are not 

guaranteed.

Fan Speed

High

Low

Min

(Low1)

(Low2)

Operating

environment

temperature

Maximum

power supply

(Power Budget)

Comments

Factory default

0-50°C

240 W

240 W

180 W

180 W

45 dB

LpA

34 dB

28 dB

0-40°C

Noise characteristics

(*2)

Summary of Contents for PN260496-NZ
























Reviews: