background image

 

● This product is a

n Air handling Unit Kit  

IMPORTANT! 

Please Read Before Starting 

This Air Handling Unit Kit must be installed by the sales dealer or suitably qualified installer. 

This information is provided for use by authorized persons only. 

1.

 

Safety Precautions 

We  assume  no  responsibility  for  accidents  or  damages  resulting  from  methods  other  than  those 
described in the Installation Instructions or methods using unspecified parts. 

Malfunctions  that  occur  due  to  unauthorized  installation  methods  are  not  covered  by  the  product 
warranty. 

● This 

Air Handling Unit Kit must be installed in accordance with National Wiring Regulations. 

● Please also read installation instructions of connected devices.

 

● When relocating or repairing this 

Air Handling Unit Kit, provide the Installation Instructions to the 

servicing personnel. 

 

Precautions for Installation setup 

  

WARNING

 

 

Turn off the circuit breaker of the units before installation. 

 

Select an installation location which is rigid and strong enough to support or hold 
this Air Handling Unit Kit and select a location for easy maintenance. 

 

Use only the parts specified by Panasonic as supplied accessories. 

 

Ensure cables are installed properly so that external forces cannot affect them. 

 

Disassembly and modification of this Air Handling Unit Kit is not permitted under 
any circumstances. 

 

 

 

 

Summary of Contents for PAW-280PAH3M

















Reviews: