25
AHU Kit – Installation Instructions –
11/2021
Product description
3
3.2 Scope of supply
The scope of supply of the AHU Kits depends on the product generation (MAH2/PAH2 or PAH3),
product version (light, medium or advanced) and on the relevant VRF system range. The following
table shows an overview of the different scopes of supply.
Scope of supply
Product generation
MAH2/PAH2
PAH3
Product version
Light
Medium
Advanced
Medium
NX
PAW-160MAH2L
PAW-160MAH2M
PAW-160MAH2
PAW-280MAH2L PAW-280PAH2L PAW-280MAH2M PAW-280PAH2M PAW-280MAH2
PAW-280PAH2
PAW-280PAH3M
PAW-560MAH2L
PAW-560MAH2M
PAW-560MAH2
IP65 case
X
X
X
X
X
X
X
Control unit including transformer
X
X
X
X
X
X
X
Relays
X
X
X
X
X
X
X
Terminal boards
X
X
X
X
X
X
X
Remote controller (CZ-RTC5B)
X
X
X
X
X
X
–
Remote controller (CZ-RTC6BL)
–
–
–
–
–
–
X
Compatibility with Panasonic H&C Control App
–
–
–
–
–
–
X
Compatibility with Panasonic H&C Diagnosis App
–
–
–
–
–
–
X
PCB for T10 connection (PAW-T10)
X
X
–
–
X
X
–
Expansion valve
X
–
X
–
X
–
–
PCBs for the expansion and RAP / SVK valves
X
–
X
–
X
–
–
Refrigerant temperature sensors
E1 + E3
X
–
X
–
X
–
–
E1 + E2
–
X
–
X
–
X
X
Air intake and air outlet temperature
sensors
TA
X
X
X
X
X
X
X
BL
X
–
X
–
X
–
–
CZ-CAPBC2 interface for 0-10 V control
(ACC-SP1A)
–
–
X
X
X
X
X
Thermostat (TR-16 / TR-16e*) including an
additional temperature sensor to be used either
for room supply air or ambient air temperature
–
–
–
–
X
X
–
*
Depending on AHU Kit generation.
The heat exchanger, fan and fan motor must be field-supplied.
Exterior view of AHU Kits and some of their compoments
Thermistor x2
(Refrigerant: E1, E2)
Thermistor
(Air: TA)
PACi accessories
Light version: PAW-280PAH2L*
1 Remote controller (CZ-RTC5B)
2 External signal control PCB (PAW-T10)
3 Terminal board with 6 connectors
* Shown as an example and with transparent front cover removed. Layout
also applicable for ECOi and ECO G, see table above, →
, for details.
1
3
2
02.06.2021, cH
- features (as deducible from PPT) included
- check if PAW-T10 PCB, Expansion valves and RAP/
SVK valve PCBs are available on PAH3M or not
- check if extra thermostat is available on PAH3M
or not
22.07.2021, cH
Changes made according to Corr.JW of 02.06.2021
22.07.2021, cH
On page 43 of the previous draft version, you have
confirmed that combinations of PZ2/PZH2 out-
door units with PAH3M are “officially compatible
and allowed”. In this case, however, we should
also mention these combinations in this table,
correct?
27.07.2021, JW
yes, agree, please also add the PACi symbol in that
column
02.08.2021, cH
in column PAH3: PACi logo added, and X added in
IP65 row (IP66 row deleted)
16.08.2021, PA
Please add a line for IP66 for PAH3 only
31.08.2021, cH
After discussing this with Paulon the phone
(25.08.2021), we decided to leave at is: IP65 for all
models (the difference between IP66 and IP65 is
too minor to make fuss about it).
27.07.2021, JW
Please delete [thermostat] from L version
02.08.2021, cH
image adjusted
25.08.2021, cH
Hint to ECOi and ECOg (or PACi see next page) in
footnote to be added (as per ii_AHUkit21_EN_
v3_2021.08.11pa.pdf).
PAW-280PAH3M
-1
Summary of Contents for PAW-280PAH3M-1
Page 2: ...Notes ...
Page 113: ...Notes ...
