manualshive.com logo in svg

Panasonic Panafax UF-8000, Service Handbook, Page: 84 / 187

Share
Download
Panasonic Panafax UF-8000 Service Handbook Download Page 84

84

UF-7000/8000

NOV 2004

Ver. 2.0

UF-7100/8100

4.2.4.2.

Page Memory Test

A test pattern prints out for checking the page memory and printer mechanism using the following 
procedure.

Press the “V”, ”/\” arrow keys to select the "3: Print Report/List" on the display.

↓

Press the “SET” key to select the "1: Function Parameter List".

↓

Press the “V”, ”/\” arrow keys to select the "3: Page Memory Test".

↓

Press the “SET” key.

↓

Press the “STOP” key twice to exit the service mode.

SC

:

TX/RX/PRT/CPY

: 000123/000456/000789/000666

SC BOOT

:

MEMORY SIZE

: (12MB)

PNL

:

MAC ADDRESS

: 08002301D3E5

PRINTER

:

SHIPMENT SET

SCANNER(SDR) :
FAX MODEM

:

SC2

:

************* TEST PATTERN PRINT **************** DATE MMM-dd-yyyy ***** TIME 12:07 ***P.01

-PANASONIC        -

*****         ****************** -                  - ****** -12345678901234567890- ***********

Summary of Contents for Panafax UF-8000




























































































































































































Reviews:

No comments