Panasonic Panafax UF-5300, Service Manual

Page: 82 / 274

82
4.3. Information Codes (INFO. CODES)
The 3-digit information codes display to show the unit’s status. These codes also print on the journal. The
following table indicates appropriate sections for troubleshooting.
Code Explanation Phase Section
001, 002, 007 Recording paper jam C, D 4.3.8.
010 No recording paper B, C 4.3.9.
030 Document misfeeding B 4.3.10.
031 Document too long C 4.3.10.
400 Transmission error B 4.3.1.
401 Transmission error B 4.3.2.
402 Transmission error B 4.3.2.
403 Polling reception error B 4.3.12.
404 Transmission error B 4.3.3.
405 Transmission error B 4.3.3.
407 Transmission error D 4.3.3.
408 Transmission error D 4.3.5.
409 Transmission error D 4.3.5.
411 Polling reception error B 4.3.12.
414 Polling reception error B 4.3.12.
415 Remote side mis-operation B 4.3.12.
416 Reception error D 4.3.4.
417 Reception error C 4.3.5.
418 Reception error C 4.3.5.
420 Reception error B 4.3.1.
422 Transmission error B 4.3.2.
434 Signal noise level too high B 4.3.6.
459 Reception error C 4.3.7.
490 Reception error C 4.3.5.
494 Reception error C 4.3.7.
495 Reception error C 4.3.7.
630 Remote unit Busy B 4.3.11.
634 No busy tone detected B --
800 - 962 Advanced Communication error -- --
Phase A : Call establishment
Phase B : Pre-message procedure
Phase C : Message transmission
Phase D : Post-message procedure
Phase E : Call release
Phase A Phase B Phase C Phase D Phase E
Message
Transmission
Facsimile Communication Procedure
Facsimile Call
Phase