32
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the
Parameter Table, are preset for you and do not need to be changed. If you do want to make a change, read
the table carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily
changed by simple key operation just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be
changed by the procedure described below.
NOTE
1. To scroll the Fax Parameters in Step 2, press
or
.
2. To print out a Fax Parameter List, see page 92.
General Description
Setting the Fax Parameters
1
SET MODE (1-8)
2
NO.=
❚
(01-99)
3
Enter Fax Parameter number from the Parameter Table.
Ex:
for
CONTRAST
NO.=01 (01-99)
4
NORMAL<>
5
Enter the new setting value or press
.
Ex:
for
LIGHTER
LIGHTER<>
6
To set another parameter, press
to return to
Step 3 or press
to return to standby.
RESOLUTION?
7
4
0
1
2
CLEAR
STOP
