
Wall-mounting
18
■
Wall-mounting procedure
1
Confirm that the wall is strong enough to support the weight of the electronic board.
Caution
The wall must be capable of supporting at least
784N [80 k
g
f (176 lbs.)].
2
1) Assemble the wall-mounting template by taping the Wall-mounting template 1
(TOP) to Wall-mounting template 2 (BOTTOM).
2) Tape the wall-mounting template on the wall.
• When taping the template on the wall, make sure it is level.
3
1) Drill holes in the wall at the 4 spots indicated
by
and ,
or
and
for
the
wall-mounting fixtures.
• Holes on the wall-mounting fixture are 7 mm in diameter.
2) After removing the wall-mounting template, attach the wall-mounting fixtures
with the appropriate wall-mounting hardware.
• Refer to the section “Attaching the wall-mounting fixtures” (page 19) for drilling in the wall and attaching the
mounting fixtures.
• Refer to steps 2 to 24 on pages 4 to 10 for attaching the printer and the screen.
A
C
B
C
517 mm
A
B
C
A
B
C
A
B
C
A
B
C
Wall-mounting
template
Wall-mounting hardware
Board attachment (upper)
(Wall-mounting fixture upper)
Board attachment (lower)
(Wall-mounting fixture lower)
Wall-mounting hardware
940 mm
Remove the
edge cover.
Remove the
edge cover.
900 mm
812 mm
Center of the electronic board