PAN9026 Wi-Fi/BT Module
5 Full Usage
Quick Start Guide Rev. 1.1
Page 20
3. Insert the USB Mouse into the USB Hub (3).
4. Insert the USB Keyboard into the USB Hub (4).
5. Connect the Serial Port Cable to the PC (5).
6. Insert headphones with a 3.5
mm jack into the green audio socket (6).
7. Insert the HDMI cable and connect it to an external HDMI monitor (7).
8. Insert the power supply (8).
The system will boot up. This takes approximately one minute.
Please wait approximately one minute so that the system can boot up
normally.
During the boot process different resolutions are used on the HDMI output.
This may confuse the attached monitor, especially when a TV set is attached.
If no output can be seen on the attached monitor, please reselect the signal
source to force the monitor to update the signal sources.
5.2 Login
You should be able to monitor the boot process of the system on the attached monitor.
When the boot process is finished you will presented with a login screen.
1. Enter the password
ubuntu
(1).
2. Click
Log In
(2).
The username of the default user is
ubuntu
and the password is always
ubuntu
as well.
