PAN1760A Bluetooth Module
Product Specification Rev. 1.1
Page 2
Overview
The PAN1760A is Panasonic’s next generation
Bluetooth module with the industry’s lowest power
Bluetooth Low Energy SoC.
Features
•
Small 15.6 mm x 8.7 mm x 1.9 mm SMD module
•
Same form factor and pinout as PAN1026,
PAN1760, and PAN1761
•
Bluetooth Low Energy 4.2 compliant
•
Embedded 256 kB flash memory and 192 kB
internal RAM
•
83 kB RAM available for user application
•
AT Command mode, Host mode, Stand-Alone
mode
•
Standard SIG BLE profiles as well
as SPPoverBLE profile
•
UART (2x), SPI & I2C interface, PWM output (4x),
ADC (5 ext, 1 int), 17 programmable I/O
•
ARM Cortex-M0 processor with Single Wire
Debug (SWD) interface
Bluetooth
•
GAP central and peripheral support for LE
•
GATT, SMP, and SDB support for LE
•
Over-the-Air firmware update
•
Support for Scatternet/Mesh network
•
BT 4.2 secure connections support through
Elliptic-Curve-DH Cryptography
•
AES-128 hardware encryption (FIPS-approved)
•
Frequent changing of device address (improved
privacy, reduced tracking ability)
•
Larger packet sizes (more efficient application and
network layer security)
Characteristics
•
Receiver sensitivity -93 dBm typ.
•
Output power 0 dBm maximum setting
•
Power supply 1.8 V to 3.6 V single operation
voltage
•
Transmit and receive 3.3 mA Tx/Rx peak power
consumption
•
Low Power 50 nA Deep Sleep mode
•
Operating temperature range -40 °C to +85 °C
Block Diagram
Chip
Antenna
Toshiba
TC35678
Slow Clock
32 KHz
UART
GPIOs
Host Wake up
Wake up
Reset
Vcc 3.3 V
LPF
PAN1760A
Bluetooth 4.2 Module
Crystal
26 MHz
DC-DC
Conversion
Flash
256 kB
SWD
