Panasonic PalmTheater DVD-LV75, Service Manual

Page: 19 / 93

5. Slide in the direction shown.
6. To reassemble, carefully repeat the steps for disassembly
in reverse order.
Note:
• • • •
Firmly engage the locks on the lockable connector.
<LC panel handling precautions>
1.
If burn on appears on the LC panel, leave it for a day with
the power off.
2. The LC panel is a high grade glass product. It can easily be
damaged by vibration, shocks and twisting.Do not press on
the panel surface. This can cause deterioration of the
picture and malfunction.
3. Do not touch the terminals of the flexible cable with bare
hands. This can cause damage through static electricity.
4. Sticking of the waterdrop to the LC panel surface causes
discoloration or stain.
Wipe off quickly.
(Care)
1.
Clean the surface with gauze or other soft cloth soaked in
isopropyl alcohol or benzene.
2. Do not wipe the surface with dry gauze, as this can scratch
the surface.
3. When cleaning, do not use water, cetones (acetone, etc.),
aromatic compounds (xylene, toluene, etc.), or halogens
under any circumstances.
9.5.5. Disassembling and reassembling
the flexible cable unit
Proceed only with the LCD display disassembled.
1. Wind the flexible cable on side B twice while disengaging
from tab E.
2. Pull out both ends of the flexible cable clasped by U-shaped
tab D.
3. Wind the flexible cable on side A 3 times while disengaging
from tab C.
4. Disengage hole C in the flexible cable from tab C.
Note:
Be careful to avoid cutting the flexible cable.
5. To reassemble, carefully repeat the steps for disassembly
in reverse order.
19
DVD-LV75 / DVD-PV55