Panasonic Palmcorder SDR-H18, Operating Instructions Manual

Page: 36 / 144

36
LSQT1190
Setup
2
Select a menu item.
≥
Use the direction buttons (
3
,
4
,
2
,
1
) and
ENTER button in place of the joystick on the
main unit.
3
Press the MENU button to exit
the menu screen.
Setting date and time
When the unit is turned on for the first time, a
message asking you to set the date and time will
appear.
≥ Select [YES] and press the joystick. Perform
steps 2 and 3 below to set the date and time.
If the screen shows the incorrect date and time,
then adjust it.
¬ Rotate the mode dial to select or
.
1
Press the MENU button, then
select [BASIC]
#
[CLOCK SET]
#
[YES] and press the joystick.
2
Move the joystick left or right to
select the item to be set. Then,
move the joystick up or down to
set the desired value.
≥
The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
≥
The 12-hour system is used to display the time.
3
Press the joystick to enter the
selection.
≥
The clock function starts at [00] seconds when
the joystick is pressed.
≥
After pressing the MENU button to finish the
setting, check the date and time display.
∫ Changing the date and time
display style
Press the MENU button, then select
[SETUP]
#
[DATE/TIME]
#
desired
display style and press the joystick.
≥
You can also show or change the date and
time display by repeatedly pressing the DATE/
TIME button on the remote control.
(SDR-H200)
∫
Changing the display style
Press the MENU button, then select
[SETUP]
#
[DATE FORMAT]
#
desired display style and press the
joystick.
MENU
ENTER
MENU
ENTER
MENU
[DATE] [D/T]
[OFF]
DEC.15.2007 DEC.15.2007 3:30 PM
LSQT1190(ENG).book 36 ページ ２００７年１月１３日 土曜日 午後３時３２分