Record mode
26
LSQT1284
Recording a still picture on a tape
(Photoshot)
≥
Set to Tape Recording Mode.
1
Press the Photoshot button [
] in the
recording pause mode.
≥
The Camcorder records a still picture for
about 7 seconds and then switches back to
the recording pause mode.
≥
If you set [ADVANCED] >> [SHTR EFFECT] >>
[ON], you can add image and a sound like
releasing the shutter.
≥
Photoshot recording results in slightly inferior
image quality.
ª
Continuous photoshot
If you set [ADVANCED] >> [SHTR EFFECT] >>
[ON] and keep the [
] button pressed, the
Camcorder will continuously record still pictures
in approx. 0.7 seconds intervals until the button is
released.
≥
The screen blinks and, at the same time, a
shutter clicking sound is recorded.
Zoom in/out function
You can zoom in up to 42
k
optically.
≥
Set to Tape Recording Mode.
1
Wide-angle recording (zoom out):
Push the [W/T] lever towards [W].
Close-up recording (zoom in):
Push the [W/T] lever towards [T].
≥
When zooming in and taking a picture while
holding the Camcorder by hand, we recommend
using the optical image stabilizer function.
-30-
≥
When you are zooming in on a faraway subject,
a sharper focus is achieved if the recording
subject is 1.3 m (4.3 feet) or further from the
Camcorder.
≥
When the zoom speed is high, the subject may
not be focused easily.
≥
When the zoom magnification is 1
k
, the
Camcorder can focus on a subject approx. 2 cm
(0.8 inches) away from the lens.
≥
Be aware that a mechanical sound may be
recorded when the [W/T] lever is released while
zooming. Gently move the zoom lever back to
it’s original position before releasing it.
1
t
t
W
T
5
t
t
W
T
42
42
t
t
W
T
PV-GS90P_LSQT1284_Eng.book 26 ページ ２００７年１１月２８日 水曜日 午前９時２０分