Before using
25
LSQT0974
ª
Operating with remote control
The menu screen transition is the same as when
the buttons on the main unit are used.
1
Press the [MENU] button.
2
Select a menu item.
≥
Use the direction buttons
(
3
,
2
,
1
,
4
) and
[ENTER] button in place of the joystick on the
main unit.
3
Press the [MENU] button to exit the menu
screen.
Adjusting LCD monitor/viewfinder
ª
Adjusting the brightness and color
level
1
Set [SETUP] >> [LCD SET] or [EVF SET] >>
[YES].
2
Move the joystick up or down in order to
select the item to be adjusted.
[LCD SET]
: Brightness of the LCD monitor
: Color level of the LCD monitor
[EVF SET]
:Brightness of the viewfinder
3
Move the joystick left or right to move the
bar indication representing the brightness.
4
Press the [MENU] button or the joystick to
complete the settings.
≥
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
≥
To adjust the brightness of the viewfinder, close
the LCD monitor and extend the viewfinder to
activate it.
≥
These settings will not affect the images actually
recorded.
ª
In order to increase the brightness of
the entire LCD monitor
1
Press the [POWER LCD] button.
≥
The [
] indication appears on the LCD
monitor.
≥
If the [POWER LCD] button is pressed, the
entire LCD monitor will become approx. twice
as bright as the normal.
≥
When the [POWER LCD] button is pressed
again, the [
] indication disappears and the
original brightness is restored.
≥
This will not affect the images to be recorded.
≥
If you turn on the Camcorder when the AC
adaptor is used, the [POWER LCD] function will
automatically be activated.
≥
You cannot use this function in PC Connection
Mode.
EVF
POWER
LCD
LSQT0974_ENG.book 25 ページ ２００５年１１月７日 月曜日 午前１１時５８分
