18
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 11).
Camera Recording
1
Set POWER to
CAMERA.
2
Press MENU for
MENU mode.
Press UP or DOWN
to select
STAND-BY RELEASE
.
3
Press DISPLAY to select ON/OFF.
ON : From Stand-by mode, press
RECORD/PAUSE two times to
resume recording.
OFF : From Stand-by mode, set
POWER to OFF, then to
CAMERA. Press RECORD/
PAUSE to record.
4
Press MENU to exit.
Stand-by Quick Release
If left in RECORD/PAUSE mode for 5
minutes, Camcorder switches to Stand-by
mode to conserve battery. When set to ON,
Stand-by Quick Release lets you resume
recording by pressing RECORD/PAUSE two
times. Stand-by Quick Release is set to OFF
at the factory.
a
Press RECORD/PAUSE to stop
recording.
b
Set POWER to OFF and leave cassette
in Camcorder.
c
To resume recording, set POWER to
CAMERA.
d
Press RECORD/PAUSE to resume
recording.
Note:
• Use Manual Easy Edit (left) if more than 24
hours before recording is resumed.
Manual Easy Editing
For a smooth transition between scenes if
recording is stopped, and then started within
24 hours.
For proper continuity when taping from
Stop mode or after attaching a new
Battery.
Easy Edit Stand-by
A
Set POWER to VCR.
B
a
Press REWIND/SEARCH to rewind
a few seconds of tape.
b
Press PLAY to review recording.
c
Press STILL where you want to
continue recording.
C
Set POWER to CAMERA.
D
Press RECORD/PAUSE to resume
recording.
2
,
3
,
4
B
b
1
,
b
,
c
,
A
,
C
a
,
d
,
D
a
c
