Others
-51-
≥
If a tape has a non-recorded portion when the
tape is dubbed, images and sounds may be
disturbed when this portion of the tape is played
back.
≥
If you set the tape counter back to 0 at the
position where you want to stop Audio Dubbing
so as to make it possible to use the Memory
Stop Function (
-57-
), Audio Dubbing is
terminated automatically when the tape reaches
this position.
≥
In the case of importing data recorded with
Audio Dubbing to a PC using the PC’s software,
only the original sound (ST1) may be imported,
depending on the software.
ª
Using the DV Cable for Recording
(Digital Dubbing)
≥
Regardless of the setting, digital dubbing is
carried out automatically in the same audio
recording mode as that of the playback
Cassette.
≥
The images on the recorded monitor may be
disturbed, but it does not affect the recorded
images.
≥
Even if Playback Digital Effects or Playback
Zoom have been used, these effects are not
output from the DV Terminal.
≥
Even if you use a device equipped with DV
Terminals, you may not be able to perform
Digital Dubbing in some cases.
≥
Date or other information to be displayed cannot
be displayed if the software of the connected
equipment does not support the display
function.
≥
Disconnect the USB Cable (optional) since
input signals from external input terminal cannot
be recorded with connecting the USB Cable.
Cautions for Use
ª
After Use
1
Take out the Cassette. (
-16-
)
2
Set the [OFF/ON] Switch to [OFF].
3
Detach the power supply and retract the
Viewfinder or the LCD Monitor. (
-14-
,
-17-
)
4
To protect the Lens, attach the supplied
Lens Cap.
ª
Cautions for Use
When you use your Camcorder on a rainy or
snowy day or on a beach, make sure that no
water enters the Camcorder.
≥
Water may cause the Camcorder or Cassette to
malfunction. (Irreparable failure may occur.)
≥
If sea water splashes onto the Camcorder, wet
a soft cloth with tap water, wring it well, and use
it to wipe the camera body carefully. Then, wipe
it again thoroughly with a soft dry cloth.
Keep the Camcorder away from magnetized
equipment (such as a microwave oven, TV,
video game equipment, etc.).
≥
If you use the Camcorder on or near a TV,
images or sounds may be disturbed due to
electromagnetic wave radiation.
≥
Do not use near a cell phone because doing so
may cause noise to adversely affect the picture
and sound.
≥
Recordings on the tape may be damaged, or
images may be distorted, by strong magnetic
fields created by speakers or large motors.
≥
Electromagnetic wave radiation generated by a
microprocessor may adversely affect the
Camcorder, causing the disturbance of images
and sounds.
≥
If the Camcorder is affected by magnetically
charged equipment and does not function
properly, turn off the Camcorder power and
detach the Battery or AC Adaptor and then
connect the Battery or AC Adaptor again.
Thereafter, turn on the Camcorder power.
Do not use your Camcorder near radio
transmitters or high-voltage cables.
≥
If you record pictures near radio transmitters or
high-voltage cables, recorded images or sounds
may be adversely affected.
Do not use this Camcorder for surveillance
purposes or other business use.
≥
If you use the Camcorder for a long period of
time, the internal temperature increases and,
consequently, this may cause malfunction.
≥
This Camcorder is not intended for business
use.
PV-GS33PP_Eng.book 51 ページ ２００４年２月２６日 木曜日 午後５時２９分
Summary of Contents for Palmcorder Multicam PV-GS33
Page 67: ... 67 ...
