61
ª
Digital Effect Functions (Camera Mode)
(
l
≥
If you set [EFFECT1] on [DIGITAL EFFECT] Sub-Menu to
[MAGICPIX], you need to adjust the focus manually.
However, you cannot adjust the shutter speed and iris and
cannot select White Balance.
≥
If [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu is set
to [MONO] or [SEPIA], the selected White Balance Mode
cannot be changed.
≥
You cannot use Program AE with Gain-up Mode
[MAGICPIX].
≥
When [PROGRESSIVE] on the [CAMERA SETUP]
Sub-Menu is set to [ON], it is not possible to use any of the
digital modes in [EFFECT1] on the [DIGITAL EFFECT]
Sub-Menu.
Wipe Mode and Mix Mode (Camera Mode) (
l
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
≥
Use the Camera Search Function
≥
Press the [STILL] Button
≥
Switch the [TAPE/CARD] Selector
Multi-Picture Mode (Camera Mode) (
l
≥
When [PROGRESSIVE] on the [CAMERA SETUP]
Sub-Menu is [ON], Multi-Picture Mode cannot be used.
≥
If the [MULTI] Button is pressed while self-recording Mirror
mode
(
l
is used, the still picture is displayed from the
upper right corner of the screen, but, in reality, the picture
is recorded from the upper left corner as usual.
≥
The quality of images recorded in Multi Mode deteriorates
slightly.
≥
Multi Mode cannot be used in still picture mode or when
mega-pixel recording is set.
P-IN-P Mode (
l
≥
Pictures in P-IN-P Mode cannot be recorded with
Progressive PhotoShot.
≥
If the Palmcorder power is turned off, the smaller picture
will disappear.
≥
A title cannot be inserted into the smaller picture.
ª
Index Search Functions
(
l
31)
≥
Index Search may not be possible at the beginning of tape.
≥
Because PhotoShot Index Signals are not recorded on still
pictures recorded in Continuous PhotoShot Mode, the
PhotoShot Index Function cannot be used for these still
pictures.
≥
Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than
1 minute.
ª
Playback Zoom Functions
(
l
≥
You cannot adjust volume with the Remote Controller in
Playback Zoom Mode.
≥
If you turn off the Palmcorder, or if you switch from VCR
Mode to Camera Mode, Playback Zoom Mode is
automatically cancelled.
≥
Even if Playback Zoom Functions are being used, images
that are output from the DV Terminal or Digital Still Picture
Terminal are not enlarged.
≥
As you enlarge an image, the quality of image suffers.
≥
If you select Multi-Picture Mode in the Playback Zoom
Mode, equivalent magnification (1
k
) becomes zoom
magnification.
≥
During the Playback Zoom Function, the Variable Speed
Search Function cannot be used with the Remote
Controller.
ª
Playback Digital Effect Functions
(
l
≥
Revised signals of images to which digital effects are
added during playback cannot be output from the DV
Terminal or Digital Still Picture Terminal.
≥
You cannot use the Wipe Function or Mix Function while
playing back the non-recorded portion of tape.
ª
Multi-Picture Mode (VCR Mode)
(
l
≥
The quality of Multi images deteriorates slightly.
≥
Playback multi-mode screens cannot be output through DV
Terminal or Digital Still Picture Terminal.
≥
If there is input from the DV Terminal, a multi screen
cannot be created.
≥
When signals are input from Video Input/Output Jack or
Audio-Video Input/Output Jack, a multi screen cannot be
re-displayed.
≥
Signals input from Video Input/Output Jack or Audio-Video
Input/Output Jack cannot be displayed on a multi screen.
≥
If you switch the Palmcorder from the Index Multi-Picture
Mode over to the Camera Mode, the setting of [SCAN
MODE] on the [MULTI-PICTURES] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu is automatically set to
[STROBE].
ª
Listening to Playback Sound Through
Headphones
(
l
If you want to listen to the playback sound of a tape through
headphones, set [AV JACK] on the [AV IN/OUT SETUP]
Sub-Menu to [OUT/PHONES] and connect the headphones
to the [PHONES] Jack on this Palmcorder. In this case, no
sound (including warning sounds and shutter sounds) will be
reproduced through the built-in speaker of the Palmcorder.
When the A/V Cable is inserted into the AV Jack, the internal
speaker works.
ª
Selecting the Sound during Playback
(
l
You can select the sound by using the [AUDIO OUT] on the
[PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:
Stereo Sound (main sound and subsound)
L:
Left channel sound (main sound)
R:
Right channel sound (sub sound)
≥
If you dub a tape recorded at the [12bit] selected as the
[AUDIO-REC] on the [RECORDING SETUP] Sub-Menu,
playback sound becomes stereo sound regardless of the
[AUDIO OUT] setting if [AUDIO] is set to [MIX].
137P.book 61 ページ ２００２年３月１９日 火曜日 午後２時５７分
