Panasonic P2HD AG-HPX610EJ, Operating Instructions Manual

Page: 85 / 179

– 85 –
Chapter 4 Adjustments and Settings for Recording — Handling setting data
f
When a file name is already set, pressing the <RESET> button
while the file name is being set clears the characters.
NAME EDIT
SW POSITION F3
S P A R K
PUSH MENU TO RETURN
f
Pressing the <MENU> button ends [NAME EDIT]. When the
changed value is fixed, it is held even if the power is turned off or
the dial position is changed. The settings of each item for the scene
file are also held in the same way.
r
Saving F1 scene data to the camera
1
Select the [LOAD/SAVE/INIT] item on the setting menu
[SCENE FILE] screen, and press the jog dial button.
For details, refer to “Setting menu basic operations” (page 116).
SCENE FILE
LOAD/SAVE/INIT
VFR
FRAME RATE
SYNC SCAN TYPE
SYNCHRO SCAN
DETAIL LEVE
V DETAIL LEVEL
DETAIL CORING
PUSH MENU TO RETURN
RETURN
LOAD
SAVE
INITIAL
0
0
0
0
2
Select [SAVE], and press the jog dial button.
SCENE FILE
LOAD/SAVE/INIT
VFR
FRAME RATE
SYNC SCAN TYPE
SYNCHRO SCAN
DETAIL LEVEL
V DETAIL LEVEL
DETAIL CORING
RETURN
LOAD
SAVE
INITIAL
0
0
0
0
PUSH MENU TO RETURN
3
Select [YES], and press the jog dial button.
f
To return to the setting menu one up the menu hierarchy, press the
<MENU> button.
SCENE FILE
SAVE ?
YES PUSH SET
NO
f
When changes to settings ends after [PROCESSING...] is
displayed, the following message is displayed:
SAVE
COMPLETED !
f
To return settings to their previously saved values after scene file
settings have been changed, select [LOAD] in step
2
, and perform
step
3
in the same way.
f
To return scene file settings to factory settings, select [INITIAL] in
step
2
, and perform step
3
in the same way.
f
To save and read user file settings, and return settings to their
factory settings, perform the same operation as for scene files at
the [USER FILE] item on the setting menu [OTHER FUNCTIONS]
screen.
Saving scene files, etc. to SD memory cards
Up to four each of scene files that have been set or other setting values can be grouped together and saved on or read from SD memory cards.
f
With scene files, current setting values are automatically saved on the camera, and that saved data is written to the SD memory card. When data is
read from an SD memory card, the current setting values are rewritten at the same time as data saved internally on the camera.
f
All scene files of F1 to F6 are rewritten. For details on handling SD memory cards, refer to “Handling SD memory cards” (page 82).
The following basically explains how to save scene files.
1
Select the [SCENE FILE] item on the setting menu [CARD
FUNCTIONS] screen, and press the jog dial button.
For details, refer to “Setting menu basic operations” (page 116).
2
Select [CHANGE], and press the jog dial button.
To select other setting values, select [USER FILE].