AVC-ULTRA
AVC-ULTRA Upgrade Service*
1
(A paid upgrade scheduled for future)
AG-HPX600 can be upgraded to support the AVC-ULTRA family of
codecs to meet the variety of image production demands.
*1: Not all AVC-ULTRA formats will be supported. The upgrade will require the replacement of a
circuit board inside the camera recorder. The service will include charges for the new circuit board,
the software upgrade, and labor.
microP2 Card
microP2 Card Compatibility Upgrade*
2
(An upgrade scheduled to begin in
April 2013)
The P2 card has evolved into the microP2 card (32 GB/64 GB), a new
solid state recording media for broadcast use. While achieving the
same compact size as the SD Memory Card and a dramatic reduction
in cost, the new microP2 card also offers high-speed data transfer,
high reliability and high security.
*2: For the latest firmware, see "Service and Support" on the Panasonic web site (http://pro-av.
panasonic.net/).
AJ-P2M032AG/064AG
microP2 Card*
3
The microP2 card features the compact size and
low cost of the SD Memory Card, while also
providing the P2 content protection of the
P2 card's highly reliable RAID technology and CPS
(Content Protection System). It achieves a
maximum data transfer speed of 2 Gbps.
*1: Requires the optional AJ-P2AD1G Memory Card Adapter
to use the microP2 Card with the AG-HPX600.
AJ-P2AD1G
Memory Card Adapter
This conversion adapter enables the use of the
microP2 card by devices, such as the
AG-HPX600, which are equipped with a P2
slot. It offers a guaranteed writing speed
up to AVC-Intra100 (excluding 1080,
60p/50p).*
4
*4: Using SDHC/SDXC memory card is not guaranteed. For
details, see the back page of this brochure (Notes Regarding
the Handling of P2 Files Using a PC – Precautions When Using
SDHC/SDXC Memory Cards with the AJ-P2AD1G Memory Card
Adapter).
AJ-MPD1G
Memory Card Drive "microP2 drive"
This compact, lightweight, low-cost
microP2 Card Drive has 2 card
slots. The high-speed USB 3.0
interface allows high-speed
reading up to 2.0 Gbps.
The VFR Option for Cinema Production Use
Variable Frame Rate Shooting and 24PsF Output
(With the optional AG-SfU602G Production Package Upgrade
Software Key)
In 720p mode, the frame rate can be set in the range of 1 fps — 60 fps,
and in 1080p mode it can be set to 1 fps — 30 fps. This allows the use of
undercranking and overcranking to create fast-motion and slow-motion
effects. Either 24p/30p Native mode or over 60p mode can be selected for
recording. In addition, the 24PsF format can be output from SDI OUT for
uncompressed data recording.
Future Proof
compatible with the P2HD next-generation codec family
AVc-ULtRA and the new solid state recording media
microP2 card.
Variable Frame Rate
Top: 24p Cinema-like
Middle: Overcrank (slow)
Bottom: Under crank (quick)
6
Shown above is a sample
of operation style.
