18
Overview of dedicated software
(continue)
For Macintosh:
Double-click on the application icon.
When the warning window advising that
[“P2DrivePowerManagement” can’t be
opened because it is from an unidentified
developer.] has appeared, click the [OK]
button.
Again, click [P2DrivePowerManagement]
while holding down the “Ctrl” key, and select
[Open] on the menu which is displayed.
The confirmation window advising that
[“P2DrivePowerManagement” is from an
unidentified developer. Are you sure you
want to open it?] now appears so click the
[Open] button.
5
Check that “Connection Status: Connected
(DC 16 V)” is displayed at the bottom left of
the Power Management Setting Software
window.
The device can be set to switch off
automatically. (page 10)
6
Shut down the Power Management Setting
Software.
For Windows:
Click × button at the top right of the window.
For Macintosh:
Click × button at the top left of the window.
Power Management Setting
Software window
Time after which device automatically
switches off
You can set time after which the power is
automatically switched off in an external
device (power is supplied by the AC adaptor)
when the P2 card is not accessed to read or
write. Select from among Off/1 hour/2 hours/
4 hours/8 hours.
The default setting at shipping is “4 hours”.
When the device is connected to your PC
externally, “Connection Status: Connected
(DC 16 V)” is displayed at the bottom left of
the window and the settings can be altered.
When not connected, “Connection Status:
Disconnected” is displayed and the settings
cannot be altered.
The current settings of the device are
displayed in the “Current Settings” column.
To alter the settings, select the new settings
and then click the “Set” button. The new
settings will be enabled when you restart the
device. After altering the settings, switch the
device off and then on again.
<Notes>
z
If you start up the Power Management
Setting Software while using the device
internally, “Unable to perform setting
changes due to power from DC IN 12 V.”
will be displayed and you cannot alter the
settings. The automatic switch-off function
is disabled.
z
The Power Management Setting Software
does not support connection of 2 of the
devices. Perform the settings separately
for each device.
AJ-PCD30P_E-VQT3R23-2_E.book 18 ページ ２０１３年３月６日 水曜日 午後６時１分
