Your PC (Personal Computer) and network must meet the following
technical specifications for the camera to work properly.
Item
Description
Operating
System
Microsoft
®
Windows
®
XP, Microsoft
®
Windows
®
2000
Microsoft
®
Windows
®
Me, Microsoft
®
Windows
®
98SE
•
For viewing single camera
Pentium
®
III (800 MHz or greater is recommended.)
•
For viewing multiple cameras
Pentium 4 (1.8 GHz or greater is recommended.)
CPU
Protocol
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
10/100 Mbps network card installed
Web Browser Internet Explorer 6.0 or later
(Not included on the Setup CD-ROM)
Audio input/output feature (Microphone or speaker)
Interface
Audio
Item
Description
Operating
System
Microsoft
®
Windows
®
XP Service Pack 1 or later
•
For viewing single camera
Pentium III (800 MHz or greater is recommended.)
•
For viewing multiple cameras
Pentium 4 (1.8 GHz or greater is recommended.)
CPU
Protocol
TCP/IP protocol
(HTTP, TCP, UDP, IP, DNS, ICMPv6, NDP)
10/100 Mbps network card installed
Web Browser Internet Explorer 6.0 or later
(Not included on the Setup CD-ROM)
Audio input/output feature (Microphone or speaker)
Interface
Audio
For IPv6 Connection
When using this product, take appropriate measures to avoid the following
security breaches.
•
Leaks of private information via this product
•
Illegal use of this product by a third party
•
Interference or suspension of the use of this product by a third party
Take the following measures to avoid security breaches:
•
To prevent illegal access, keep the update firmware
(If you do not have the latest version of firmware, this can lead to
blocked access or information leaks).
•
You are responsible for the security settings, such as user name and
password, to access this product. This information should not be made
available to any third parties outside the user group.
•
Mount the camera where the camera will not be stolen.
•
You are responsible for this product's user information, such as videos,
still images and internet contents etc. This information should not be
made available to any third parties outside the user group.
•
When sending this product to be repaired with a company not related to
Panasonic, make back-up copies of files, if necessary, and reset this
product to factory default.
•
When transferring this product to another party, make back-up copies of
files, if necessary, and reset this product to factory default.
•
When disposing of this product, reset this product to factory default,
or erase information by means of electrical deletion or physical
dismantlement.
Main Unit . . . . . . . . . . . . . . . . . . 1 pc.
AC Adaptor . . . . . . . . . . . . . 1 pc.
Order No.: PQLV202Y
(Cord Length: About 3 m [9.84 feet])
AC Cord . . . . . . . . . . . . . . . . . . . 1 pc.
Order No.: PSJA1069Z
(Cord Length: About 1.8 m [5.91 feet])
Setup CD-ROM . . . . . . . . . . 1 pc.
Order No.: PSQX3637ZCD
Flexible Stand . . . . . . . . . . . . . . 1 pc.
Order No.: PSKL1020W
Installation
(This manual) . . . . . . . . . . . . . . 1 pc.
Getting Started . . . . . . . . . . . . . 1 pc.
Screws . . . . . . . . . . . . . . . . . . .3 pcs.
Order No.: PQHE5004Y
The following items are provided with the camera.
Additional pieces can be ordered by calling 1-800-332-5368.
System Requirements for your PC
For IPv4 Connection
What is IPv6?
• IPv6 is short for "Internet Protocol Version 6".
• IPv6 was created to address the additional IP addresses that will be
needed as the Internet continues to expand.
• IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a
number of years during a transition period.
• Though most ISPs (Internet Service Providers) do not yet support IPv6,
many local networks already use it. When your ISP supports IPv6, your
Panasonic Network Camera will be ready!
• For more information you wish to visit
http://www.ipv6.org/.
Security Cautions
Included Items
Carefully pack your unit, preferably in the original carton.
Attach a letter, detailing the symptom, to the outside of the carton.
Symptom
Send the unit to an authorized servicenter, prepaid and adequately insured.
Do not send your unit to the Panasonic Consumer Electronics Company listed below or to
executive or regional sales offices. These locations do not repair consumer products.
When you ship the product
Panasonic Servicenters are listed in the servicenter directory.
Call 1-800-272-7033 for the location of an authorized servicenter.
This Network Camera is designed for use in the United States of America.
Sale or use of this product in other countries/areas may violate local laws.
For product service
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
Panasonic Puerto Rico, Inc.
The information in this document is subject to change without notice.
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced
for internal use only. All other reproduction, in whole or in part, is prohibited without the written
consent of Panasonic Communications Co., Ltd.
The use of a unique User Name and secret Password is an
important tool that will help limit unauthorized individuals from
accessing the camera. If you choose to disable this tool, and
choose not to limit access by use of a User Name and Password,
this may result in access to the camera by unauthorized individuals.
(See page 80 of the Operating Instructions on the Setup CD-ROM)
User Name and Password Protection
Note
See Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for details about
network environment.
