Panasonic OneHome BB-HCM331A Operating Instructions Manual Download Page 133

Page: 133 / 150

Operating Instructions

133

[For assistance, please call: 1-800-272-7033]

3.9

Using Setup Program

The Setup Program can be used for the following purposes.
•

Finding the IP address and port number of the camera connected to your
network.

•

Setting up the camera automatically.

•

Setting up the camera manually to a Static or a DHCP setting.

•

Displaying the Setup page.

Finding the camera

Insert the Setup CD-ROM into the CD-ROM drive of your PC.

•

If the Panasonic Network Camera Setup window does not appear, click
"setup.exe" on the Setup CD-ROM.

Click [Camera Setup].

Displays version information
about this program.

Sets up the camera.
Displays the camera manuals.
If your PC does not have Adobe

Acrobat

Reader

, install it from

the Adobe Reader website.

Installs Network Camera
Recorder trial version.

Closes the Setup Program.

Summary of Contents for OneHome BB-HCM331A























































































































































Search results

Summary of Contents for OneHome BB-HCM331A

Reviews:

Related manuals for OneHome BB-HCM331A

Brands by name

Popular brands

Panasonic OneHome BB-HCM331A, Operating Instructions Manual

Search results

Summary of Contents for OneHome BB-HCM331A

Reviews:

Related manuals for OneHome BB-HCM331A

Brands by name

Popular brands