Panasonic Omnivision PV-D4733S Operating Instructions Manual Download

Page: 35 / 64

Copying Your Tapes (Dubbing)

Insert a pre-recorded tape.

Insert a blank tape with record tab.

Press REC

, then

PAUSE/STILL

immediately to enter REC/PAUSE
mode.

Press INPUT

to set DECK Input mode to

LINE for Video Input.

(See “Selecting the Input Mode” below.)

Press PLAY

to start dubbing.

Playing VCR starts playback.

Press PAUSE/STILL

to start dubbing.

DECK starts recording.

Press STOP

to stop dubbing.

Caution:

• Unauthorized exchanging and/or copying of copyrighted recordings may be

copyright infringement.

• Please note that some tapes cannot be dubbed on DECK. Also, it is not

possible to dub DVD/ Video CD/ CD to VHS tapes using DECK.

Playing (Source) VCR

Recording (Editing) DECK

To Monitor Dubbing on TV

Turn TV on and tune to the Recording
VCR channel (CH 3 or CH 4).

If Auto VCR/TV (see p.32) is set to
“OFF,” press VCR/TV on the remote to
be VCR mode.

Note

• Dubbing tapes protected with Copy

Guard will result in poor quality
recordings.

Connection

Press STOP

to stop dubbing.

Press PLAY

, then

PAUSE/STILL

immediately to enter PLAY/PAUSE
mode.

The operation of steps 4 and 5 must be done on the
playing and recording VCRs at the same time.

Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.
To monitor the dubbing, also connect TV as shown.

Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R”
AUDIO IN terminals on DECK.

In place of Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit’s Audio/Video outputs to DECK.

Selecting the Input Mode

Method 1:

Press INPUT

repeatedly.

Channel Number

↔

LINE1

↔

LINE2

Method 2:

Press CH

/ .

Display will change as below.

Front of DECK

VIDEO IN 2

L-AUDIO IN2-R

(Audio/Video In Terminals
on the front of DECK are
available)

IN FROM ANT.

OUT TO TV

IN 1

VHF/UHF

OUT

VHF/

UHF

DVD/VCR DECK

VIDEO

AUDIO1

VCR/ Camcorder

(Hi-Fi)

VIDEO

AUDIO

• “L1” or “L2” lights up on Multi Function Display

(about 4 seconds) when LINE1 or LINE2 is selected.

• LINE1: For rear audio/video connection.

LINE2: For front audio/video connection.

VCR

Operation

125

LINE1

(CABLE)

(TV)

LINE2

Press

D4733S P26-35 (030226 B-lot).p65

2003/02/26, 18:20

Summary of Contents for Omnivision PV-D4733S

































































Search results

Summary of Contents for Omnivision PV-D4733S

Reviews:

Related manuals for Omnivision PV-D4733S

Brands by name

Popular brands

Panasonic Omnivision PV-D4733S, Operating Instructions Manual

Search results

Summary of Contents for Omnivision PV-D4733S

Reviews:

Related manuals for Omnivision PV-D4733S

Brands by name

Popular brands