25
Timer Operation
Repeat steps 1 and 2 on page 24.
1
CANCEL : ADD / DLT
SELECT 1 - 8 :
ENTER :
END : PROG / ACT I ON
P DT START STOP CH SPD
1 day 9 : 00p 12 : 00a 08 SP
2 8 10 : 00a 12 : 00p 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
8 SAT
SAT 9:00P 12: 00A 08
TODAY
CATEGORY : MOV I E
----------------------------------------------
DATE START STOP CH
ABC
SP
SELE CT START
START DATE
SELECT :
SET :
END : PROG / ACT I ON
P DT START STOP CH SPD
1 -- -- : -- -- : -- -- --
2 8 10 : 00p 12 : 00a 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
SELECT 1 - 8 :
ENTER :
END : PROG / ACT I ON
Press PROG
twice (or
ACTION
) to exit
this mode.
2
3
To Replace program...
To Clear program...
4
Press
to select
the desired program.
1)
Press
to display.
2)
Press
to select
and
press
or
to set new program
contents.
3)
Press PROG
(or
ACTION
)
Cancel a Timer Recording:
(Recording is in progress)
Hold down STOP for a few seconds
to cancel the Timer Recording.
• Any future daily or weekly recordings
will be performed as programmed.
Press ADD/DLT
.
Review, Replace or Clear Program
Contents : (Recording is not in progress)
• 2 minutes before Timer recording is performed,
“PLEASE PREPARE FOR TIMER REC” appears
and/or the PROG TIMER Indicator flashes.
Be sure a cassette with record tab is loaded and the
unit is in Stop mode.
• If the start times of two programs overlap, the lower
numbered program will have priority.
• If the start time for a Timer Recording comes up
during a normal recording or One Touch Recording
(page 14), the Timer Recording will not be performed.
• If there is a power interruption of more than one minute,
the recording may not be performed or continued.
• If “INCOMPLETE” appears after all items have been
set, check all entries and make necessary corrections.
• When using DC Power supply, a Timer Recording can
not be performed if POWER on the unit is pressed OFF.
Notes