Charging the Battery
Charge the Battery before using it.
1
Attach the Battery.
≥
Align the Battery with line
1
and push it in the direction
of the arrow while holding it down.
2
Securely connect the AC Power Cord to the AC
Adaptor and an AC mains jack.
≥
The [POWER] Lamp
2
lights and then the [CHARGE]
Lamp
3
flashes and charging starts.
≥
If the [CHARGE] Lamp
3
does not flash even though
the Battery is attached, remove the Battery and then re-
attach it.
∫
∫
∫
∫
∫
Charging Lamp [CHARGE]
Flashing:
During charging
Lit:
The Battery can already be used to
operate the Movie Camera but it is not
yet fully charged.
(Approx. 30-minute battery charge)
Off:
The Battery is fully charged.
∫
∫
∫
∫
∫
Removing the Battery
Slide it in the opposite direction of that indicated in step 1
above.
≥
Charge the Battery at a room temperature between 10
x
C and
30
x
C.
≥
When charging, do not connect the DC Input Lead to the AC
Adaptor.
≥
During recording or charging, the Battery becomes warm.
However, this is normal.
≥
If you charge the Battery when it is not yet discharged, the
[CHARGE] Lamp
3
may flash briefly and then go out. This
indicates that the Battery is fully charged. Therefore, this is
not an indication of a malfunction.
2
2 3
1
1
