Panasonic NV-VP32EE Service Manual Download Page 11

Page: 11 / 102

STEP4.LINE-IN SETTING & ACTIVATE PLUG-IN A.T.P.

1. Press

the

Channel

and

down

keys

simultaneously for more than 3 seconds until the
channel on the unit’s display changes to 1, under the
condition of the no tape is in the unit.

2. Confirm that "A1" and "A2" can be displayed on the

FIP by pressing the CH UP and CH DOWN buttons.

3. Disconnect the AC plug for few seconds and

connect it again, and press POWER button for
turning the power to on from off to carry out the
"Plug in Auto Tuner Preset".

4. Since other than the channels that can be stored by

"Auto Tuning" operation are not available yet, preset
manually by consulting the note of its available TV
channels of which you took before.

STEP5.TAPE INTERCHANGEABILITY ADJUSTMENT

Refer to the Electrical Adjustment Procedures.

NV-VP32GN / NV-VP32EE

Summary of Contents for NV-VP32EE







































































































Search results

Summary of Contents for NV-VP32EE

Reviews:

Related manuals for NV-VP32EE

Brands by name

Popular brands

Panasonic NV-VP32EE, Service Manual

Search results

Summary of Contents for NV-VP32EE

Reviews:

Related manuals for NV-VP32EE

Brands by name

Popular brands